Picked up some GTi seats for the ute but the stock fixed rails are too short for the holes in the GTi seats, So need a pair of drivers side rails from a tin/soft top.
Will probably need them posted, Let me know.
| auszookers.com https://auszookers.com/forum/ |
|
| A pair of driver side seat rails from tin or soft top sierra https://auszookers.com/forum/viewtopic.php?f=8&t=50366 |
Page 1 of 1 |
| Author: | Blkfxx [ Fri Jun 19, 2015 5:14 pm ] |
| Post subject: | A pair of driver side seat rails from tin or soft top sierra |
Picked up some GTi seats for the ute but the stock fixed rails are too short for the holes in the GTi seats, So need a pair of drivers side rails from a tin/soft top. Will probably need them posted, Let me know.
|
|
| Author: | Scrawny [ Fri Jun 19, 2015 6:09 pm ] |
| Post subject: | Re: A pair of driver side seat rails from tin or soft top si |
Can't just use some flat bar to adapt it? |
|
| Author: | dougies_tx5turbo [ Fri Jun 19, 2015 6:49 pm ] |
| Post subject: | Re: A pair of driver side seat rails from tin or soft top si |
Got a pair $15 plus post 4500 |
|
| Author: | Blkfxx [ Fri Jun 19, 2015 7:01 pm ] |
| Post subject: | Re: A pair of driver side seat rails from tin or soft top si |
I'll keep that in mind dougie, See how I go adapting mine. Yea, Going to give that a go tomorrow, Scrawn. Having the seat slide forward for access would be nice though. |
|
| Author: | Blkfxx [ Tue Jun 23, 2015 5:46 pm ] |
| Post subject: | Re: A pair of driver side seat rails from tin or soft top si |
All good, Don't need these anymore. I was able to make my stock rails work. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|