| auszookers.com https://auszookers.com/forum/ |
|
| WTB: SE Vit LWB 5.12 rear diff hub-to-hub & front centre https://auszookers.com/forum/viewtopic.php?f=8&t=51038 |
Page 1 of 1 |
| Author: | Reubs [ Fri Sep 18, 2015 11:33 am ] |
| Post subject: | WTB: SE Vit LWB 5.12 rear diff hub-to-hub & front centre |
Wanted. As per title. Have cash ready. A complete 1.6 SE Vitara rear diff housing with 5.12 ratio hub-to-hub and a 5.12 (edit: front) centre which doesn't need to be in a housing. Will be rebuilding so anything suitable considered. Willing to drive within 500km of Brisbane to pickup. Post up or PM what you've got. Thanks. Reubs. |
|
| Author: | tonyevans [ Fri Sep 18, 2015 12:43 pm ] |
| Post subject: | Re: WTB: SE Vit LWB 5.12 rear diff hub-to-hub & front centre |
What year is the SE? |
|
| Author: | Reubs [ Fri Sep 18, 2015 1:27 pm ] |
| Post subject: | Re: WTB: SE Vit LWB 5.12 rear diff hub-to-hub & front centre |
'94 - later model with screw type air filter box and 3 wire AFM. This housing will either go into the above LWB or my '92 SWB. Reason for swapping is I am swapping air lockers from the SWB which are of 4.8 ratio from a GV into the LWB and so I need new ratios and could do a complete rebuild at the same time. Am I correct in assuming the only changes are the 10/12 bolt centres? |
|
| Author: | tonyevans [ Fri Sep 18, 2015 3:02 pm ] |
| Post subject: | Re: WTB: SE Vit LWB 5.12 rear diff hub-to-hub & front centre |
I have a Vit LWB out back that I am going to wreck so I will have to look at the plate for build date. Is the model ID on there anywhere? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|