| auszookers.com https://auszookers.com/forum/ |
|
| G16 camshaft https://auszookers.com/forum/viewtopic.php?f=8&t=52778 |
Page 1 of 1 |
| Author: | frak [ Fri Jul 08, 2016 9:34 pm ] |
| Post subject: | G16 camshaft |
For a regrind. I am in canberra or snsw generally. I am curious: is there a difference between the g13 and g16 sohc heads and cams? I think they are the same but never seen that in writing. If same then a g13 sohc shaft would do of course. |
|
| Author: | jdk81 [ Sat Jul 09, 2016 7:35 pm ] |
| Post subject: | Re: G16 camshaft |
Do you want g16a or b? |
|
| Author: | frak [ Sun Jul 10, 2016 1:16 pm ] |
| Post subject: | Re: G16 camshaft |
I have a g16b. from your questio the sensor changes a to b did change the camshaft itself? |
|
| Author: | frak [ Thu Jul 14, 2016 4:41 pm ] |
| Post subject: | Re: G16 camshaft |
Anybody? |
|
| Author: | jdk81 [ Thu Jul 14, 2016 8:33 pm ] |
| Post subject: | Re: G16 camshaft |
G16a is 8v, g16b is 16v. G16b (vit) has gear teeth for the dizzy G13bb (jimny cam) has teeth for the sensor (whispers of a different cam profile, i havent seen much info on this) G16b (baleno coil pack) has different teeth for the sensor, and different to the jimny G16b baleno dizzy/swift has end for dizzy out the back. |
|
| Author: | MrRocky [ Sun Jul 17, 2016 11:26 am ] |
| Post subject: | Re: G16 camshaft |
You will make less power with the g13bb camshaft in a g16b |
|
| Author: | frak [ Sun Jul 17, 2016 12:17 pm ] |
| Post subject: | Re: G16 camshaft |
I just need a g16b vit shaft to get it reground. |
|
| Author: | frak [ Fri Jul 22, 2016 12:07 am ] |
| Post subject: | Re: G16 camshaft |
Nobody has a spare? If it helps you could have mine when i am done. Only option so far is to buy the head tjat guy is selling in gumtree take the cam and throw the rest away... Or get a new one at about 400 them get that reground. That would make it damn expensive. |
|
| Author: | suzukitas [ Mon Jul 25, 2016 11:00 pm ] |
| Post subject: | Re: G16 camshaft |
I can sell you one, but would be $100incl post. |
|
| Author: | suzukitas [ Mon Jul 25, 2016 11:01 pm ] |
| Post subject: | Re: G16 camshaft |
call or sms me 0437097475 Brad |
|
| Author: | frak [ Wed Jul 27, 2016 8:30 pm ] |
| Post subject: | Re: G16 camshaft |
Brad that would be great. If you can check your email though you n3ver responded to problems last year with the order for a diff and cross member. Until then i would always go to you first and tell everybody the same. I had some health issues and jusg let it go in the end. It would be nice to think you didnt read the email since you were fantastic to deal with up till then. I have reforwarded it now. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|