| auszookers.com https://auszookers.com/forum/ |
|
| Sierra Radiator wanted in Brisbane... https://auszookers.com/forum/viewtopic.php?f=8&t=54152 |
Page 1 of 1 |
| Author: | Toomanycars [ Mon Apr 17, 2017 9:24 pm ] |
| Post subject: | Sierra Radiator wanted in Brisbane... |
Aaaaahhhhhh... it's never ending.. Replaced steering box and noticed radiator has crack, then found #4 extractor pipe is cracked...no wonder it has been sounding strange lately....My son is just over it...One thing after another...Anyone with a good radiator they are willing to part with, pleeease let me know... In the mean time the extractors are coming off for a bit of a welding job...Cheers. |
|
| Author: | tanked [ Tue Apr 18, 2017 6:14 pm ] |
| Post subject: | Re: Sierra Radiator wanted in Brisbane... |
I have one out of my old leafy sierra you can have if you want to come and get it if it will fit. Based near Ipswich |
|
| Author: | Toomanycars [ Tue Apr 18, 2017 10:15 pm ] |
| Post subject: | Re: Sierra Radiator wanted in Brisbane... |
Thanks for the offer mate.. As long as it is in good condition, it is worth the drive to pick it up. You are over an hour from here.. Are the fins still straight etc ???????? |
|
| Author: | Mickc [ Wed Apr 19, 2017 1:36 pm ] |
| Post subject: | Re: Sierra Radiator wanted in Brisbane... |
Sorry is it a coily or late model WT sierra? Got a radiator from Cars-R-Us, about $120. They up sunshine coast way. Radiator is multi drilled to fit a leafy or a coily. From memory the older WT shroud is about 40mm too short (height) for a perfect fit. Coily (or late model WT?) shroud is right length. |
|
| Author: | Toomanycars [ Wed Apr 19, 2017 4:04 pm ] |
| Post subject: | Re: Sierra Radiator wanted in Brisbane... |
Hmmm ok.. Wh have one of each here so I will compare and get back to you. Don't mind moding things to make them work so as long as it is in good condition, we will probably pay you a visit.. |
|
| Author: | tanked [ Wed Apr 19, 2017 6:51 pm ] |
| Post subject: | Re: Sierra Radiator wanted in Brisbane... |
its the car thats in the picture of my avatar, yeah the fins are nice last time i checked it. I work at underwood if that helps gets it a bit closer.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|