| auszookers.com https://auszookers.com/forum/ |
|
| Still need some parts........ https://auszookers.com/forum/viewtopic.php?f=8&t=55032 |
Page 1 of 1 |
| Author: | paulh [ Tue Feb 20, 2018 1:32 pm ] |
| Post subject: | Still need some parts........ |
Hi Everyone LJ80 project nearly finished but still need original roll bar, side door gates/bars and a set of SJ disc callipers (I have the discs, thanks to MrRocky). . Happy to pay someone to fabricate door bars. |
|
| Author: | sideways [ Tue Feb 20, 2018 1:39 pm ] |
| Post subject: | Re: Still need some parts........ |
I'd get a roll bar made if you can't do it yourself. Finding an original one in usable condition will be a heck of a challenge, they're pretty flimsy and probably wouldn't do much in a roll anyway. It wont cost much for a fabrication joint to do one, by all accounds XLR8 fab are good to deal with and turn out some very tidy work. They aren't far from you. Door bars are reasonably priced new on eBay from Columbia. For calipers if no one bites here I'd hit up facebook. |
|
| Author: | paulh [ Tue Feb 20, 2018 2:15 pm ] |
| Post subject: | Re: Still need some parts........ |
Thanks sideways. The Columbian door bars work out around $250, I'll need to save up! |
|
| Author: | suzukitas [ Tue Feb 20, 2018 11:52 pm ] |
| Post subject: | Re: Still need some parts........ |
anyone have detailed picture(s) of what an original roll bar is like? |
|
| Author: | paulh [ Wed Feb 21, 2018 10:09 am ] |
| Post subject: | Re: Still need some parts........ |
https://www.ebay.com.au/itm/18306888708 ... 3068887089 |
|
| Author: | MrRocky [ Wed Feb 21, 2018 2:05 pm ] |
| Post subject: | Re: Still need some parts........ |
Wow mine worked out at $150 they must have gone up. I will be redoing my rollbar in the next few months when i paint. Yours if you want it. |
|
| Author: | sideways [ Wed Feb 21, 2018 2:49 pm ] |
| Post subject: | Re: Still need some parts........ |
MrRocky wrote: Wow mine worked out at $150 they must have gone up. Yeah that's more the sort of price I remember them being. |
|
| Author: | paulh [ Thu Feb 22, 2018 9:42 am ] |
| Post subject: | Re: Still need some parts........ |
Much appreciated MrRocky!! I think the postage from Columbia went through the roof about 6 months ago. |
|
| Author: | shep [ Thu Feb 22, 2018 1:05 pm ] |
| Post subject: | Re: Still need some parts........ |
I might have some Sierra calipers. Will have a look tonight |
|
| Author: | paulh [ Thu Feb 22, 2018 8:28 pm ] |
| Post subject: | Re: Still need some parts........ |
Thanks shep, fingers crossed! |
|
| Author: | shep [ Thu Mar 01, 2018 6:13 pm ] |
| Post subject: | Re: Still need some parts........ |
I have found one caliper. I plan on cleaning my shed this weekend so hopefully find the other one. |
|
| Author: | paulh [ Fri Mar 02, 2018 7:44 pm ] |
| Post subject: | Re: Still need some parts........ |
That's great shep, thanks. |
|
| Author: | MrRocky [ Sat Mar 03, 2018 12:33 pm ] |
| Post subject: | Re: Still need some parts........ |
I think i have one but its pretty crusty |
|
| Author: | paulh [ Sat Mar 03, 2018 6:37 pm ] |
| Post subject: | Re: Still need some parts........ |
I have access to a sand blaster MrRocky. |
|
| Author: | MrRocky [ Sat Mar 03, 2018 9:44 pm ] |
| Post subject: | Re: Still need some parts........ |
Ok ill dig it out |
|
| Author: | paulh [ Sun Mar 04, 2018 12:06 pm ] |
| Post subject: | Re: Still need some parts........ |
Cheers! |
|
| Author: | MrRocky [ Tue Mar 06, 2018 1:14 pm ] |
| Post subject: | Re: Still need some parts........ |
Pm sent |
|
| Author: | shep [ Tue Mar 06, 2018 2:02 pm ] |
| Post subject: | Re: Still need some parts........ |
I didn’t get a chance to look for the caliper. Will try and get onto it in the next day or so. |
|
| Author: | paulh [ Thu Mar 08, 2018 4:49 pm ] |
| Post subject: | Re: Still need some parts........ |
Thank you shep. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|