Are you offering me one?
| auszookers.com https://auszookers.com/forum/ |
|
| 1/2" Rattle Gun https://auszookers.com/forum/viewtopic.php?f=8&t=9977 |
Page 1 of 1 |
| Author: | Scrawny [ Sat Feb 20, 2010 6:46 pm ] |
| Post subject: | 1/2" Rattle Gun |
Let me know what you have. I don't want a crap no-name one, I want something decent. If you have a spare/old one in good working order I want it. |
|
| Author: | squizzytaylor [ Sat Feb 20, 2010 6:56 pm ] |
| Post subject: | Re: Rattle Gun |
Ingersoll Rand 2135Ti, 1/2 Inch drive. http://www.ingersoll-rand-airtools.com/ir2135ti.html |
|
| Author: | Scrawny [ Sat Feb 20, 2010 7:19 pm ] |
| Post subject: | Re: Rattle Gun |
Are you offering me one?
|
|
| Author: | squizzytaylor [ Sat Feb 20, 2010 10:10 pm ] |
| Post subject: | Re: Rattle Gun |
It was a recommendation rather than an offer but I do have one downstairs that I haven't used for a while, I used to rep for the Aussie distributor and bought a full set of IR cordless tools before i left them which has left this one somewhat abandoned. If you want it $250 delivered (includes an inline lubricator, tool oil and grease but for about $50 more you could get a new one from the states. The one in the link here is a tad heavier (about 2.5kgs) but still has 600ft/lb torque and are ultra reliable. http://cgi.ebay.com.au/Ingersoll-Rand-1 ... 27af6f08f7 Or as I mentioned from the states http://cgi.ebay.com/ebaymotors/Ingersol ... veQ5fTools Hope this of some help |
|
| Author: | brendan [ Sat Feb 20, 2010 10:59 pm ] |
| Post subject: | Re: Rattle Gun |
try looking for a 2nd hand snap on or somthing. i got a snapon rattle gun i use only for undoing bolts that my other gun wont. its a fucking beast of a thing. 700 ft lb. of torque; 1300 blow/min |
|
| Author: | ajsr [ Sat Feb 20, 2010 11:29 pm ] |
| Post subject: | Re: Rattle Gun |
personaly I think the sidchrome ones are good value long lasting gun. |
|
| Author: | squizzytaylor [ Sat Feb 20, 2010 11:44 pm ] |
| Post subject: | Re: Rattle Gun |
ajsr wrote: personaly I think the sidchrome ones are good value long lasting gun.
Yep, and all made by IR  possibly cheaper to purchase though due to the quantity they move.
|
|
| Author: | Scrawny [ Sun Feb 21, 2010 12:11 am ] |
| Post subject: | Re: Rattle Gun |
brendan wrote: try looking for a 2nd hand snap on or somthing. This was the idea I had squizzytaylor wrote: If you want it $250 delivered (includes an inline lubricator, tool oil and grease
I will let you know |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|