It is currently Mon Jul 13, 2026 1:59 am
Board index » Shift It And Find It » I Want it I Want it I want it



Post new topic Reply to topic  [ 11 posts ] 
Author Message

Offline
User avatar

Joined: Mon Sep 28, 2009 11:30 pm
Posts: 298
Location: Darwin, NT

Post Posted: Wed Jul 07, 2010 2:24 am 
Reply with quote Top  
Don't need this anymore, thanks for all the help anyway


Looking for the three brackets which bolt to the body of the car that the single two-seater bench seat attaches to. (one in the center of the back of the seat, and one on each side at the front of the seat) I already have the seat, just need these brackets.

Postage is to Darwin, 0812.

_________________
1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su


Last edited by lordfury007 on Thu Sep 30, 2010 11:13 am, edited 2 times in total.
 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Post Posted: Wed Jul 07, 2010 6:40 am 
Reply with quote Top  
I'll go look in the shed, I have a couple of the rear bit's..

_________________
I used to be indecisive,
now I'm not so sure.....

 Profile  

Offline
User avatar

Joined: Mon Sep 28, 2009 11:30 pm
Posts: 298
Location: Darwin, NT

Post Posted: Thu Jul 08, 2010 11:30 pm 
Reply with quote Top  
Thanks to steknig, I have the rear center bracket being sent. Still looking for the front two brackets, but if i can't find any then i'll look at getting them made up (i dont think it'll be hard)

_________________
1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su

 Profile  

Offline
User avatar

Joined: Mon Sep 28, 2009 11:30 pm
Posts: 298
Location: Darwin, NT

Post Posted: Tue Jul 13, 2010 7:47 am 
Reply with quote Top  
Shameless bump... Still looking for the front two brackets

_________________
1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su

 Profile  

Offline
User avatar

Joined: Mon Sep 28, 2009 11:30 pm
Posts: 298
Location: Darwin, NT

Post Posted: Sun Aug 01, 2010 9:06 pm 
Reply with quote Top  
another bump - Still looking for the front two brackets

this isnt a good fix

Image

_________________
1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Post Posted: Mon Aug 02, 2010 1:22 am 
Reply with quote Top  
Jas, (want33s) has a bench seat like that one, thay only came out is some car's, Suzuki saw it was cheaper in freight to get em made over here..
:P
Or if you have a welder, just make some..

The one I sent you for the rear may not work.. 8O

_________________
I used to be indecisive,
now I'm not so sure.....

 Profile  

Offline
User avatar

Joined: Mon Sep 28, 2009 11:30 pm
Posts: 298
Location: Darwin, NT

Post Posted: Mon Aug 02, 2010 1:51 am 
Reply with quote Top  
Yeah last time i asked Jas he didn't have any, but that might have changed... I also didn't send him a picture though...

The rear striker plate you sent me looks like it would work fine, as long as the front brackets hold the seat in the right place for the rear clips to hit it correctly.

And i don't have a welder, and even if i did it wouldn't be easy because the floor is guttered, and so you'd have to get the baseplate bent before being welded.

All in all, i'm really hoping to find some original brackets to fit these somewhere...

Suzishop thinks its not an original seat, havent heard from suzisport or suziworld yet...

_________________
1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su

 Profile  

Offline
User avatar

Joined: Fri Sep 25, 2009 11:30 pm
Posts: 1204
Location: sunshine coast

Post Posted: Mon Aug 02, 2010 2:10 am 
Reply with quote Top  
i asked jason the other day he only had a custom rear seat but may have one now who knows

 Profile  

Offline
User avatar

Joined: Mon Sep 28, 2009 11:30 pm
Posts: 298
Location: Darwin, NT

Post Posted: Tue Aug 03, 2010 11:57 am 
Reply with quote Top  
Suziworld have given me a (hopefully) priceless bit of information regarding this...

[quote=suziworld]those particular seats were made by a place
called Van extra's located in Victoria. They still might be
going, try looking them up on the webb[/quote]

and yellow pages mentions this place in NSW

http://www.yellowpages.com.au/nsw/north ... sting.html

and a number of places called Van and 4wd extras in victoria

http://www.yellowpages.com.au/search/li ... ia&x=0&y=0

will make a few phone calls tomorrow and see how we go. Will update this thread if i find them

_________________
1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su

 Profile  

Offline
User avatar

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 192
Location: Brisbane Northside

Post Posted: Tue Aug 03, 2010 12:21 pm 
Reply with quote Top  
mate send me a pm if u still need them i reckon there mite be sum in the back of shed sumwhere

_________________
819FKA has Been UNLEASHED

 Profile  

Offline
User avatar

Joined: Mon Sep 28, 2009 11:30 pm
Posts: 298
Location: Darwin, NT

Post Posted: Thu Sep 30, 2010 11:12 am 
Reply with quote Top  
Don't need these brackets anymore, just bought:

http://darwin.gumtree.com.au/c-Cars-Veh ... Z225901172

$200 was a steal, they're in brand new condition with a little dust...

_________________
1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 38 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours