[robbo]

If you have or know of where one is at a reasonable price let me know.

Cheers Rob

[4x4ish]

what is a reasonable price and what is too much. i will need one at a later date no doubt and would like to know in the real world what they are costing.

[Mick70b]

I just quoted $450 for a complete steel GV front diff? I already have the 5.12 R&P to go into it but the $450 bites

[atari4x4]

thats about average... they have gone for more & they have gone for less...

[robbo]

already have the housing just chasing down the centre. 250-350 is what i expect to pay for the centre alone

[atari4x4]

when talking "centre" are you reffering to the pinion carrier?

i bought a new one for $120, still in the original box/wrapping.

EDIT: you will only need the carrier if you're fitting it to a vitara as you will need to swap the 5.12:1 diff ratio into the steel carrier, you could recoup some $$$$'s by selling the 4.6 or 4.8 diff gears that come with the GV carrier.

[robbo]

Yep just need the bit the r&p goes into. 5.12's are already done just have to be swapped over.

[Mick70b]

Just checking that a '99 GV Steel diff will fit my '97 Vit, Both are 26 spline and I've got the 5.12 R&P ready to go, so I just have to have the 5.12s swapped into it right ???

4X4ish there is one at SuziFour Wreckers at the moment, they wanted $550 complete, not sure if they will part it out for you.