auszookers.com • View topic - Help pulling front diff apart ...

Board index » Talking About Stuff » Suzuki Talk

Help pulling front diff apart ...

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

Mick70b

Joined: Sun May 09, 2010 9:14 am
Posts: 265
Location: Sydney West

Posted: Tue Jul 27, 2010 10:13 am

Can anyone tell me how to get the green CV housing off the driver side of the GV diff? I have tapped the shaft out of the other side, but still can't get the housing apart.
[img][IMG]http://i867.photobucket.com/albums/ab235/mick70b/IMG_0007.jpg[/img][/img]
Sorry it's not downsized, I'm having trouble resizing and uploading images

_________________
Virgil the Vitara
SV620 Estate

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Tue Jul 27, 2010 10:17 am

pry it out with a flat bladed screw driver, be gentle :wink:

EDIT: in between the housing & the CV cup.

_________________
You're just hating because you don't understand

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Jul 27, 2010 10:19 am

put the bolts back on your centre. Its likely the axle is binding in the centre.

_________________
2013 GV
1998 SV420 ute

Mick70b

Joined: Sun May 09, 2010 9:14 am
Posts: 265
Location: Sydney West

Posted: Tue Jul 27, 2010 10:25 am

okay thanks guys I will try that ... tomorrow, I was playing with a big screwdriver as you said but I have been VERY gentle because I wasn't too sure what I was doing

_________________
Virgil the Vitara
SV620 Estate

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Tue Jul 27, 2010 10:45 am

Fatzook wrote:

put the bolts back on your centre. Its likely the axle is binding in the centre.

nice spotting, i didn't even look at the picture :oops:

_________________
You're just hating because you don't understand

Mick70b

Joined: Sun May 09, 2010 9:14 am
Posts: 265
Location: Sydney West

Posted: Wed Jul 28, 2010 10:35 am

I've been trying with a big flat screwdriver and have only got it to move about 6-8mm ?

_________________
Virgil the Vitara
SV620 Estate

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Wed Jul 28, 2010 10:41 am

did you bolt the diff centre back in?

_________________
2013 GV
1998 SV420 ute

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Wed Jul 28, 2010 11:35 am

Mick70b wrote:

I've been trying with a big flat screwdriver and have only got it to move about 6-8mm ?

Fatzook wrote:

did you bolt the diff centre back in?

6 to 8mm is just the spline, you will need to put a lil more force behind it, i've had to flog pry bar's with hammer's to get em out..

& as Mr Fat said, the center loose like that will put pressure on the shaft. not allowing it to come out..

_________________
I used to be indecisive,
now I'm not so sure.....

Mick70b

Joined: Sun May 09, 2010 9:14 am
Posts: 265
Location: Sydney West

Posted: Wed Jul 28, 2010 12:10 pm

Yep the bolts are back in, just didn't know how hard I should go with it, will have another go with a bit ore oomph .... :wink:

_________________
Virgil the Vitara
SV620 Estate

Page 1 of 1

[ 9 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 324 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum