| Author |
Message |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Mon Jun 02, 2008 5:02 am |
|
|
Where is the best place(cheapest) to get a starter motor for a 1.3 sierra and how much would one cost?
Cheers
Mike
|
|
|
|
 |
Bruce

az supporter
Joined: Sun Jun 11, 2006 11:30 pm Posts: 4003 Location: Brisbane
|
 Posted: Mon Jun 02, 2008 12:19 pm |
|
Well that just depends where you live.  Need a bit more info than down under.
_________________ [quote="royce"] I wouldnt mind insulating my rear
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Mon Jun 02, 2008 12:32 pm |
|
i think "under down under" means Tasmania
and you can't talk Brucie, you don't even have a location 
|
|
|
|
 |
terry
Joined: Mon Nov 19, 2007 10:30 pm Posts: 63
|
 Posted: Mon Jun 02, 2008 1:31 pm |
|
check ur phone book under wreckers if ur in tassie. if u
tried that and had found nothing try www.suzisport.com that
should help.
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Tue Jun 03, 2008 3:02 am |
|
Bruce wrote: Well that just depends where you live.  Need a bit more info than down under.
well i live in hobart but if i can find one cheap enough somewhere i'd just get it posted to me
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Tue Jun 03, 2008 3:04 am |
|
steve wrote: i think "under down under" means Tasmania  and you can't talk Brucie, you don't even have a location 
yep i live there but under down under sounds more interesting than just saying tassie 
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Tue Jun 03, 2008 3:07 am |
|
terry wrote: check ur phone book under wreckers if ur in tassie. if u tried that and had found nothing try www.suzisport.com that should help.
it would be cheaper buying a whole sierra than buying a starter motor from a wreckers here
suzisports is the only place other than repco that i've found so far that have them
cheers
|
|
|
|
 |
neil_se
Joined: Fri Feb 29, 2008 10:30 pm Posts: 78 Location: Toowoomba
|
 Posted: Tue Jun 03, 2008 11:50 am |
|
|
Can you get just the solenoid from anywhere cheaper, or another model eg.swift solenoid that fits?
_________________ 92 WT softback ute, twin lockrights, 3.9 diffs, S1
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Tue Jun 03, 2008 11:12 pm |
|
|
i think the 1.3 swifts are a different starter alltogether? Quote me if im wrong. When my starter snapped the ratchet type shaft i found another started motor out of a 95 or earlier lancer if that helps, May be cheaper?..
My sierra starter is a Mitsubishi Brand, Where as swifts had another like Bosch or Denso or sumthing, cant remember.
Hope it helps dude!
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Tue Jun 03, 2008 11:43 pm |
|
neil_se wrote: Can you get just the solenoid from anywhere cheaper, or another model eg.swift solenoid that fits?
its hard to get anything for suzukis here and i'm stuggling to just find the whole starter motor, so far the only place here i can find one is repco and don't get me to started on repco
first they told me suzuki didn't make a 1.3 litre sierra in 1990 and they didn't believe me when i said i had one then when getting a price on a starter motor one minute it ws $210 and they had one then it was $350 and they would have to order one from bosch
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Tue Jun 03, 2008 11:45 pm |
|
BlueSuzy wrote: i think the 1.3 swifts are a different starter alltogether? Quote me if im wrong. When my starter snapped the ratchet type shaft i found another started motor out of a 95 or earlier lancer if that helps, May be cheaper?.. My sierra starter is a Mitsubishi Brand, Where as swifts had another like Bosch or Denso or sumthing, cant remember.
Hope it helps dude!
what model sierra is yours and do all have the same brand?
Cheers
|
|
|
|
 |
MUD-PIG
Joined: Wed Apr 02, 2008 10:30 pm Posts: 1941 Location: Darwin N.T
|
 Posted: Wed Jun 04, 2008 4:37 am |
|
|
Go directly to your Automotive electrical supplier thats what I did cut out the middle guys adding on their price in between. From the problems I had when getting a starter motor the different costs and prices came from the fact that I think the 1.6 starter also fits as well but its a longer motor where as the Sierra one is shorter.
I have been given these two part numbers that fit both 1.3 and 1.6 when trying to sort out mine they both fit.
1300 part number M3T38981 or 31100-83010 - What I have in mine now, which is a 92 model Sierra. I went straight to
1600 part number M1T72481 or 31100-60A20
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Wed Jun 04, 2008 4:56 am |
|
MUD-PIG wrote: Go directly to your Automotive electrical supplier thats what I did cut out the middle guys adding on their price in between. From the problems I had when getting a starter motor the different costs and prices came from the fact that I think the 1.6 starter also fits as well but its a longer motor where as the Sierra one is shorter.
I have been given these two part numbers that fit both 1.3 and 1.6 when trying to sort out mine they both fit.
1300 part number M3T38981 or 31100-83010 - What I have in mine now, which is a 92 model Sierra. I went straight to 1600 part number M1T72481 or 31100-60A20
do you know what brands these part numbers correspond with?
|
|
|
|
 |
MUD-PIG
Joined: Wed Apr 02, 2008 10:30 pm Posts: 1941 Location: Darwin N.T
|
 Posted: Wed Jun 04, 2008 5:13 am |
|
|
Revolution Race gear I think.... Re manufactured stuff, either way parts shops have cross reference to check those part numbers are easy enough to look up.
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Wed Jun 04, 2008 5:19 am |
|
|
would you remember off the top of your head how much roughly was the reco starter?
|
|
|
|
 |
MUD-PIG
Joined: Wed Apr 02, 2008 10:30 pm Posts: 1941 Location: Darwin N.T
|
 Posted: Wed Jun 04, 2008 7:39 am |
|
|
Ill try look back on my accounts or for a recipe but I think it was just over $200 or so...
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Wed Jun 04, 2008 8:29 pm |
|
|
i have a 91 1.3 wt sierra, starter was mitsubishi brand. Although i dont have the 1.3. i still use it in my 1.6 just machined down....
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
|