| Author |
Message |
zookz

az supporter
Joined: Wed Mar 30, 2011 2:38 am Posts: 80 Location: South West
Vehicle: Vitara G16b , Sierra G16b
|
 Posted: Mon May 23, 2011 1:34 pm |
|
|
As per the title Wrecking SJ's. Body's are rooted due to cancer rust but drivetrain and most of the interior is good.
Keeping the SJ40 transfer (with 4wd light).
Just to list a few:
Diffs x5
Transfer (no 4wd light)
4 speed gearbox
Drive shafts
Motors (good no noises run well done roughly (200-300thou)
Fairly new front rotors and pads from the SJ40
Dizzy's and coils
Alternators
Starters
Seats etc etc...
Dash's
Wiper motors
Fuel Tanks
Glass (front doors and rear hatch glass)
Back door with glass
Seat belts
Water pump (new)
Got heaps of other spare parts...just ask
Can post small items and diff centers but anything bigger or heavier you organise courier
Located near Denmark WA
Can get Big Parts to Perth
Shoot me a PM or post here
Or txt 0459355677
Cheers!
Last edited by zookz on Tue May 24, 2011 3:31 pm, edited 3 times in total.
|
|
|
|
 |
sstteevvee
Joined: Wed Apr 06, 2011 1:54 pm Posts: 134 Location: Perth
|
 Posted: Mon May 23, 2011 1:52 pm |
|
|
Hey mate, do you have any that are fitted with drum brakes at the front? If you do i'm chasing a master cylinder to suit front drums if you have one.
|
|
|
|
 |
zookz

az supporter
Joined: Wed Mar 30, 2011 2:38 am Posts: 80 Location: South West
Vehicle: Vitara G16b , Sierra G16b
|
 Posted: Mon May 23, 2011 1:54 pm |
|
|
Yeah I do, I sent you a PM! Cheers
|
|
|
|
 |
sstteevvee
Joined: Wed Apr 06, 2011 1:54 pm Posts: 134 Location: Perth
|
 Posted: Mon May 23, 2011 1:56 pm |
|
|
Thanks mate PM has been replied to
|
|
|
|
 |
zookz

az supporter
Joined: Wed Mar 30, 2011 2:38 am Posts: 80 Location: South West
Vehicle: Vitara G16b , Sierra G16b
|
 Posted: Mon May 23, 2011 2:26 pm |
|
|
*1lt drum sj410 m/c sold*
|
|
|
|
 |
super_sheep12345
Joined: Sun Mar 28, 2010 10:30 pm Posts: 15 Location: Perth
|
 Posted: Tue May 24, 2011 11:42 am |
|
|
you wouldnt have a complete disc brake from end would you? if so how much? and what are the radiators like? ooo and passenger seat/seat rails
|
|
|
|
 |
zookz

az supporter
Joined: Wed Mar 30, 2011 2:38 am Posts: 80 Location: South West
Vehicle: Vitara G16b , Sierra G16b
|
 Posted: Tue May 24, 2011 1:01 pm |
|
|
|
 |
Red89
Joined: Tue Jan 12, 2010 10:30 pm Posts: 2801 Location: Perth
|
 Posted: Wed May 25, 2011 8:30 am |
|
|
How cancerous are the bodies ? I know of someone looking for a buggy project, so he doesnt need guards etc simply a cab area, bonnet and chassis should be enough.
|
|
|
|
 |
zookz

az supporter
Joined: Wed Mar 30, 2011 2:38 am Posts: 80 Location: South West
Vehicle: Vitara G16b , Sierra G16b
|
 Posted: Wed May 25, 2011 12:13 pm |
|
Red89 wrote: How cancerous are the bodies ? I know of someone looking for a buggy project, so he doesnt need guards etc simply a cab area, bonnet and chassis should be enough.
One of the chassis is ok but both have bad foot well rust. Like your leg will fall down if you haven't got a matt lol. Right hand chassis mount near your right foot has detached from the body too.
Bonnet is easily fixable and only what I would call light rust.
Yeah in all honesty the cab is pretty bad on the inner firewall (where stones etc hit in wheel arch) and also the rear is really bad too sorry.
|
|
|
|
 |
Red89
Joined: Tue Jan 12, 2010 10:30 pm Posts: 2801 Location: Perth
|
 Posted: Sat May 28, 2011 1:23 am |
|
|
Cheers mate I'll let them know.
|
|
|
|
 |
sstteevvee
Joined: Wed Apr 06, 2011 1:54 pm Posts: 134 Location: Perth
|
 Posted: Mon May 30, 2011 1:49 pm |
|
|
Thanks zookz, master cylinder arrived today!
Another one, what condition is the crossmember under the sj410's gearbox like?
Would you be able to send me a PM with a price for the crossmember and mounting bolts delivered?
|
|
|
|
 |
zookz

az supporter
Joined: Wed Mar 30, 2011 2:38 am Posts: 80 Location: South West
Vehicle: Vitara G16b , Sierra G16b
|
 Posted: Tue May 31, 2011 2:09 am |
|
|
Ok cool glad it arrived safely. Pm'd sstteevee.
|
|
|
|
 |
|