auszookers.com • View topic - Spark Plug Gap for Vitata needed please.

Board index » Talking About Stuff » Suzuki Talk

Spark Plug Gap for Vitata needed please.

Page 1 of 1

[ 14 posts ]

Print view

Previous topic | Next topic

Author

Message

suzukiboy

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 607
Location: Brisbane
Vehicle: Suzuki Grand Vitara

Posted: Sat Jun 11, 2011 3:20 am

What is the Spark Plug Gap for my 1995 Vitara, 1.6 EFI.

NGK - BKR6E

Can find my workshop book.

..............is it 0.7 to 0.8mm..??

Last edited by suzukiboy on Sat Jun 11, 2011 3:30 am, edited 1 time in total.

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Sat Jun 11, 2011 3:30 am

Should be 0.8mm. Why do you need to gap them?

suzukiboy

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 607
Location: Brisbane
Vehicle: Suzuki Grand Vitara

Posted: Sat Jun 11, 2011 3:32 am

Scrawn wrote:

Should be 0.8mm. Why do you need to gap them?

Should be gaped from factory, but know knows if someone hasn't dropped one, etc.

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Sat Jun 11, 2011 4:33 am

I've never had an issue with NGK plugs. They come with that protective tube

suzukiboy

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 607
Location: Brisbane
Vehicle: Suzuki Grand Vitara

Posted: Sat Jun 11, 2011 4:57 am

Checked them and they where all 0.9

Old plug where a bit white might be running lean.

SuziBlu

Joined: Mon Sep 14, 2009 11:30 pm
Posts: 4268
Location: Eyre Peninsula

Posted: Sat Jun 11, 2011 5:48 am

I check new plugs even, as the manufacturer states, "should" be fine.

For the few secs it takes to check, great piece of mind.

Every oil change, I check them as well.

Usually perfect, but it takes bugger all time, and it will forecast a possible problem developing.

I run my plugs at 1.25mm, thats on a carby 1.3l

_________________
Bad decisions make good stories.

MacDaddy

az supporter

Joined: Thu Mar 26, 2009 10:30 pm
Posts: 10453
Location: Perth, Australia
Vehicle: Jeep

Posted: Sat Jun 11, 2011 8:16 am

SuziBlu wrote:

I Always gap new plugs, never had one new out of the box, set to the correct gap... :roll:

Hmmm 1.25mm is a pretty big gap

be careful your coil doesnt run too hot and burnout... but with a gap that big, it must ignite the fuel very well... :roll:

SuziBlu

Joined: Mon Sep 14, 2009 11:30 pm
Posts: 4268
Location: Eyre Peninsula

Posted: Sat Jun 11, 2011 3:01 pm

I think it does, but, i have a big fat coil.

_________________
Bad decisions make good stories.

suzukiboy

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 607
Location: Brisbane
Vehicle: Suzuki Grand Vitara

Posted: Mon Jun 13, 2011 2:17 am

Here is a coulpe of pics of the spark plugs.

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Mon Jun 13, 2011 6:49 am

look nice to me, I posted a link here once about reading plugs and what things like that heat mark on the ground mean and so on

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Mon Jun 13, 2011 7:20 am

Here's one guide

http://www.ngkspark.com.au/sparkplug_tech.php#

Under "Spark Plug Analysis"

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Mon Jun 13, 2011 7:28 am

This is a thread I posted up a while ago regarding plugs

http://www.auszookers.com/index.php?nam ... spark+plug

_________________
Lil Foot!
http://tiny.cc/gtsw1

MacDaddy

az supporter

Joined: Thu Mar 26, 2009 10:30 pm
Posts: 10453
Location: Perth, Australia
Vehicle: Jeep

Posted: Mon Jun 13, 2011 7:56 am

suzukiboy wrote:

Here is a coulpe of pics of the spark plugs.

Those plugs look like they are burning well... but i did notice some rust on the thread of the plug, could be nothing, but you might want to keep an eye on that..

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Mon Jun 13, 2011 8:21 am

lol its impossible to to have rust on a plug thread in an alloy headed engine, its probably anti seize (in which case it needs more)

Page 1 of 1

[ 14 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 313 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum