| Author |
Message |
shep
Joined: Thu Mar 29, 2007 11:30 pm Posts: 14498 Location: Here there everywhere
Vehicle: A manly awesome man jimny
|
 Posted: Thu Oct 23, 2008 12:13 pm |
|
Cozook wrote: Its funny how passengers think your flying when they're not used to zooks.... regardless of the fact all the other cars are overtaking me!!!!! Bastards are gunna wear out my glovebox grab handle soon!!
take it off, you don't sit in the passenger seat. 
|
|
|
|
 |
Cozook
Joined: Thu Sep 11, 2008 11:30 pm Posts: 725 Location: Blue mountains.
Vehicle: 98 coily..Max.
|
 Posted: Thu Oct 23, 2008 1:10 pm |
|
My dog uses it too,gotta leave it for him..... 
_________________ Suzuki...four wheel jive!
98 coily...Camping rig.
|
|
|
|
 |
morpheus

az supporter
Joined: Mon Oct 06, 2008 10:30 pm Posts: 689 Location: Adelaide
|
 Posted: Thu Oct 23, 2008 3:59 pm |
|
|
do u think running premium in the zook will
A) make any difference at all
B) melt the little 1.3
|
|
|
|
 |
Cozook
Joined: Thu Sep 11, 2008 11:30 pm Posts: 725 Location: Blue mountains.
Vehicle: 98 coily..Max.
|
 Posted: Thu Oct 23, 2008 8:19 pm |
|
|
If I don't run premium it pings its little ass off.....
I also reckon it uses less fuel,wouldn't be much but and i could imagining that.
_________________ Suzuki...four wheel jive!
98 coily...Camping rig.
|
|
|
|
 |
morpheus

az supporter
Joined: Mon Oct 06, 2008 10:30 pm Posts: 689 Location: Adelaide
|
 Posted: Fri Oct 24, 2008 2:11 am |
|
ya know i had a race with my GF tonight, me in my 1.3, and her in her 1.0.
neck and neck from 0 - 80, after that i run out of steam and the 1.0 pulls away from me. i paid $2400 for my car. she paid $500

|
|
|
|
 |
Cozook
Joined: Thu Sep 11, 2008 11:30 pm Posts: 725 Location: Blue mountains.
Vehicle: 98 coily..Max.
|
 Posted: Fri Oct 24, 2008 2:23 am |
|
|
Get a key cut for hers.....
Say it got stolen........
And trash it.....
You do not have the required permissions to view the files attached to this post.
_________________ Suzuki...four wheel jive!
98 coily...Camping rig.
|
|
|
|
 |
morpheus

az supporter
Joined: Mon Oct 06, 2008 10:30 pm Posts: 689 Location: Adelaide
|
 Posted: Fri Oct 24, 2008 3:07 am |
|
|
i'll have the bull bar.....
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Fri Oct 24, 2008 3:56 pm |
|
Another sad day for a Suzy 
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
something_else
Joined: Sun Apr 06, 2008 11:30 pm Posts: 819 Location: Pimpama
|
 Posted: Fri Oct 24, 2008 6:34 pm |
|
|
my stock sierra ute 87 model on the highway stock tyre size if i floor it will go to 160.. lol way past top speed on the speedo 140 =P it screams at about 4100 rpm so i ease off. maybe its cause its alot lighter than the hard and soft top. i think it could get to 175 if i was full throttle for about 2 minutes but it'd be doin 4500 rpm.
_________________ Lj81.
Ke20.
Baleno.
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Fri Oct 24, 2008 6:48 pm |
|
|
I am waaaaaaaaaaaaaaaaaaaaaaaaaaaaay to lazy to be bothered doing the maths but 4100rpm is not 160km/hr
|
|
|
|
 |
lilzook
Joined: Sun May 04, 2008 11:30 pm Posts: 50 Location: Eastern suburbs, vic
|
 Posted: Fri Oct 24, 2008 7:56 pm |
|
|
with the 29s i got mine to read 127kmish on the speedo down a huge hill on the western hwy. in 5th gear ofcourse. swb 1.3 stock gearing stock everything.
|
|
|
|
 |
something_else
Joined: Sun Apr 06, 2008 11:30 pm Posts: 819 Location: Pimpama
|
 Posted: Fri Oct 24, 2008 8:12 pm |
|
royce wrote: I am waaaaaaaaaaaaaaaaaaaaaaaaaaaaay to lazy to be bothered doing the maths but 4100rpm is not 160km/hr
hmm well my speedo goes wayy past 140 and i speed past cars on the highway quite fast. its like 4100-4200 area. lol was dragging this little barina and was keeping up, shoulda seen their faces haha
|
|
|
|
 |
Cozook
Joined: Thu Sep 11, 2008 11:30 pm Posts: 725 Location: Blue mountains.
Vehicle: 98 coily..Max.
|
 Posted: Fri Oct 24, 2008 9:22 pm |
|
When is that Zookbusters show gunna start again?
Anyone know where I can get some J-dan rockets..... 
_________________ Suzuki...four wheel jive!
98 coily...Camping rig.
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Fri Oct 24, 2008 11:23 pm |
|
zookieboi wrote: my stock sierra ute 87 model on the highway stock tyre size if i floor it will go to 160.. lol way past top speed on the speedo 140 =P it screams at about 4100 rpm so i ease off. maybe its cause its alot lighter than the hard and soft top. i think it could get to 175 if i was full throttle for about 2 minutes but it'd be doin 4500 rpm.
lets see.....a stock zook....with stock tyres....should be revving around to 4000 rpm when its at 100.....so 4100 at 160 should equate to.....40 inch tyres...  when me and ken went off our dials we were doing about 6000 rpm....just shy of the rev limiter. you got a nos bottle hooked up?....oh...and check your calibration.
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
smileysmoke
Joined: Sat Jun 16, 2007 11:30 pm Posts: 227
|
 Posted: Fri Oct 24, 2008 11:26 pm |
|
with 31s i have had mine up past the end of the speedo.. thats with my adjusted gauges.. ill get the gps cranking next time.. but i am too scared to take my eyes off the road at that speed! farken changes lane all on its own! 
|
|
|
|
 |
Cozook
Joined: Thu Sep 11, 2008 11:30 pm Posts: 725 Location: Blue mountains.
Vehicle: 98 coily..Max.
|
 Posted: Fri Oct 24, 2008 11:30 pm |
|
|
Fark mine changes lane when it hits potholes at 40.....
175 I'd probably end up goin the other way!!!!
_________________ Suzuki...four wheel jive!
98 coily...Camping rig.
|
|
|
|
 |
2stroker
Joined: Sun Sep 07, 2008 11:30 pm Posts: 2689 Location: North Brisbane
|
 Posted: Sat Oct 25, 2008 1:14 am |
|
|
I had my bro's LJ50 up to 130kph.............."A" framing it home behind the Jeep....does that count.
|
|
|
|
 |
TZAR

az supporter
Joined: Tue Aug 01, 2006 11:30 pm Posts: 3459 Location: licking some windows
Vehicle: LJ20 LJ50
|
 Posted: Sat Oct 25, 2008 4:20 am |
|
|
Lets go roughly on some calculations
say a WT sierra with 235/75R15 on it
235/75R15 = 2.3M per revolution
205/70R15 = 2.09m per revolution
3.7 diff gears
1.4 transfer high range
0.85 5th gear
total reduction = 4.403
so to make the rear wheel do 1 revolution per minute the engine will have to do 4.403 revolutions per minute thus making the car travel at 2.3 metres per minute = 0.138km/h
so say 160km/h = 2.667 km/ minute
2667m/m = 1159 wheel revolutions per minute
1159 wheel revolutions per minute = 5103 rpm for the engine
this is not what the speedo will be saying though. This is calculated speed not allowing for the weight of the car decreasing the actual diameter of the tyre.
If we change this to a 205/70R15 then it will be a lot different.
so say 160km/h = 2.667 km/ minute
2667m/m = 1276 wheel revolutions per minute
1276 wheel revolutions per minute = 5618 rpm for the engine
Vitarda are even different again
high range = 1:1
5th gear = 0.85
4.5 diff gears
total reduction = 3.825
235/75R15
so say 160km/h = 2.667 km/ minute
2667m/m = 1159 wheel revolutions per minute
1159 wheel revolutions per minute = 4433 rpm for the engine
205/70R15
so say 160km/h = 2.667 km/ minute
2667m/m = 1276 wheel revolutions per minute
1276 wheel revolutions per minute = 4880rpm for the engine
_________________ Camels have nice toes
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sat Oct 25, 2008 10:47 am |
|
vitaras have 205/75 
|
|
|
|
 |
Rockhopper
Joined: Sun Jun 22, 2008 11:30 pm Posts: 1265 Location: Chipping Norton
|
 Posted: Sat Oct 25, 2008 11:44 am |
|
|
Just back on topic, one thing you can do, is check the scondaries in the carby are working. Take the vacuum line off the inlet manifold which goes to the air cleaner assembly (for the hot air control) and connect it to the secondary actuator diaphram on the carby. When the engine is running you should see it pull the diaphram up. Using a mirror look down the secondary side of the carby and make sure you can see fuel going into it when you rev the crap out of it. I do emphasize don't just look down the carby, because by chance if it backfires through the carby you are going to be in deep shit and a world of pain. If it is all working, just try leaving that vacuum line on and go for a drive down the freeway and see if it makes a differance.
I've actually just put a t-peice in the vacuum line that goes from the charcoal cannister to the carby, so the secondary actuator still opens the secondaries under vacuum conditions and closes again at idle, it makes a world of differance, and goes like the powers of piss right throught to 6500 rpm. Only drawback I can think of, you'll probably use more fuel.
|
|
|
|
 |
|