[orangeshannon]

hi i have a G16B block out of a 1991 LWB vitara that im wanting to get rid of. i dorve the car home to use it only for parts but i dont need the block and the engine didnt blow an ounce but i wouldnt trust it i would rebuild it just incase. i would only be looking at selling it for about $200ono

i do have other vitara engine parts
power steering pump works great didnt make a sound
A/C pump
exhaust from cat back no manifold
automatic transmission worked great (without transfer case)

PM me if your interested in any of the parts that i got for sale

[denty802]

is it the g16b that matches up with the head off a g13b?

[orangeshannon]

yeh from what i have heard that the G series engines pretty much match up with any of them best to have a llok on the forum if they do im pretty sure they do but dont take my work for it

[Teracis]

Do you happen to have the steering box? and is it the one that fits into a SWB sierra with benT's kit?

[orangeshannon]

pics

[Abraxix]

Alternator?
price?
and Dang you live in Burwood, if only i was still in Cheltenham >.>
still interetsed though!!!

[orangeshannon]

for sale
Block G16B with 16 valve pistons and water pump
Autotrans without transfer case
Exhaust from the cat back
A/C pump
Power steering p[ump

[orangeshannon]

front brake rotors and calipers both sold

[orangeshannon]

engine (block only)
gearbox (auto without transfer case)
standard exhaust
A/C pump
power steering pump

all still for sale

[607CHA]

Interested in the ps pump. What other ps parts you got wanting to put in a sierra

[orangeshannon]

also have a complete rear diff including drums
all the front diff parts avaliable not including rotors or calipers and cvs need work

[ollies]

hi bloke , what you asking for the auto?

[orangeshannon]

pm sent

[orangeshannon]

i might add that the car has never been off road used only around the city so theres nothing wrong with the transfer case works perfectly he guy i bourght it off said that i had never been taken out or rear wheel drive but low high and four low work fine no noise smooth gear change

[orangeshannon]

G16 B engine block including flywheel and standrad tourqe converter
$200

Automatic gearbox worked no noise or problems selected every gear no drama
$200
transfer case never been taken out of rear wheel drive but four hi and low work a treat
$100
front diff
$100
rear diff including brakes
$100
front and rear springs
$50

[orangeshannon]

all parts listed avaliable

will start taking these parts off the car this weekend so pick up anytime will be avaliable. also im will to deliver within 50km for cost of fuel

[shep]

how much for gearbox plus ecu and loom?

[orangeshannon]

also i have a G16B head (inparts suit reco) $100-

and i have a efi manifold with all injectors just been removed from the car when it was running $80

1992 G16B vitara efi ecu $100

i am also removing the efi wiring loom cut down to the electronics just for efi $50

1992 EFI air flow sensor exellent working condition $160

EFI exhaust manifold with OXY sensor $30

the pipe for air intake that goes across the rocker cover and all piping for air intake $50

air box including pipe inlet to air box $50

1992 G16B 16 valve rocker cover painted red with runs or i can sand blust it back to bare alloy $30

[orangeshannon]

pm me with an offer if you think its abit much and i'll consider it

[orangeshannon]

the prices are very flexiable make me an offer.

these parts really need to go now i have no use for them anymore

[shep]

orangeshannon wrote:

pm me with an offer if you think its abit much and i'll consider it

do you still have the loom for the auto?

[orangeshannon]

which part of it do you need the bit from the fire wall to the box? or from the fire wall to where ever it goes? i have a almost complete loom its just the efi is getting cut out of it so someone is able to do a G16B efi sierra conversion.

[shep]

dunno. i have a manual 16v vitara motor that i want to stick a auto on so i can slap it in my sierra.

[bohuler]

orangeshannon wrote:

front brake rotors and calipers both sold

Cheers for that mate!!!

Dave

[orangeshannon]

im glad to help out anytime

[Fatzook]

shep wrote:

dunno. i have a manual 16v vitara motor that i want to stick a auto on so i can slap it in my sierra.

You'll need the flex plate, converter and auto box. Also the TCM and wiring loom, and ECU.

Also get the auto lines ( hard lines ) with the banjo bolts. And the shifter and cables.

[orangeshannon]

also i have a radiator for it looks to be in good nik the car never heated up past 1/4 mark may only need to be flushed out.

i will start posting up lots of pics this weekend of all the parts im selling

[orangeshannon]

this is the rocker cover as you can see is has a bit of run on it i can eaither sand it back and respray in the metalic red colour or i could sandblast it back to bare metal for you for no extra cost

[orangeshannon]

some pics and more to come

[orangeshannon]

EXHAUST MANIFOLD HAS BEEN CRACKED AND REWELDED BEFOR I BOURGHT THE CAR SO IM GIVING IT AWAY FOR FREE USE AS A SPARE