auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

vl engine mounts

Page 2 of 2

[ 58 posts ]

Go to page Previous 1, 2

Print view

Previous topic | Next topic

Author

Message

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Wed Sep 14, 2011 9:54 am

jonno_racing wrote:

SierraDan wrote:

Commonly used by the bogans to do skids.

when are you getting one then?

Not anytime soon. I find them quite ugly.

_________________
mlm

masterA

az supporter

Joined: Tue Jan 18, 2011 3:24 am
Posts: 976
Location: Perth

Posted: Thu Sep 15, 2011 12:54 am

Anyone got a pic?

If the locating pin has to be ground off does a new hole need to be drilled or anything welded?

_________________
Fast,Cheap,Reliable-Pick 2 & 3rd is laughable

UBZ

Joined: Sun Nov 16, 2008 10:30 pm
Posts: 297
Location: NZ
Vehicle: LJ50 , LJ80Q-II

Posted: Thu Sep 15, 2011 1:16 am

I run VL mounts on the My Gti conversion .
Stock mounts lasted the length of the driveway.

I left the locating pins in place and cut/filed small slots into the engine mounting brackets to suit.

boostedbrick

az supporter

Joined: Tue Jun 29, 2010 7:44 am
Posts: 2003
Location: Brisbane
Vehicle: 2018 DMAX

Posted: Thu Sep 15, 2011 1:38 am

Not sure why so many people destroy stock mounts. My are stock sierra and still holding strong

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Thu Sep 15, 2011 1:45 am

boostedbrick wrote:

Not sure why so many people destroy stock mounts. My are stock sierra and still holding strong

Probably because they are 3/4 fucked before they do an engine swap?

_________________
2013 GV
1998 SV420 ute

birko

az supporter

Joined: Sun Jun 07, 2009 11:30 pm
Posts: 573
Location: Perth WA

Posted: Thu Sep 15, 2011 5:33 am

Fatzook wrote:

boostedbrick wrote:

Not sure why so many people destroy stock mounts. My are stock sierra and still holding strong

Probably because they are 3/4 fucked before they do an engine swap?

yep same, 1.6 baleno conversion put in new repco replacement mounts, still going good. I bought vl mounts a while ago, filed the pin of and threw em in the back of the zook thinking id need to replece the stock ones soon and 1 year later still good. i have bust a g/box mount though

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Sun Sep 18, 2011 6:51 am

finally gettin back to this post :oops:

the mounts will be for the 1.3 in my truggy build so vibrations of bush type ones wont stress me but if i can just slap some vls in and be reliable im happy enough to go that way too???all comes down to whats gonna cop some abuse and work well

i have had a broken mount in my black zuk with the 1.6 for too long now and am too lazy to fix it. but it wasnt the best looking mount when i done the conversion.Have a replacement here and all just cant be bothered :oops:

birko

az supporter

Joined: Sun Jun 07, 2009 11:30 pm
Posts: 573
Location: Perth WA

Posted: Sun Sep 18, 2011 10:28 am

well vl all the way then. Even think they are cheaper then 1.3 ones

zooktastic

Joined: Mon May 11, 2009 11:30 pm
Posts: 941
Location: west sydney

Posted: Sun Sep 18, 2011 7:40 pm

birko wrote:

well vl all the way then. Even think they are cheaper then 1.3 ones

they are pretty close

ajsr

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 3712
Location: melb

Posted: Sun Sep 18, 2011 8:23 pm

SierraDan wrote:

skyman wrote:

We got Nissan's in 87, but you guys sure go allot better styling, ours are square and Oooogly.

Our r31's are square but the VL's were a Holden that used the RB30 because the 5L V8 didnt meet the new emissions or something.

Commonly used by the bogans to do skids.

so how come you could buy them in a 5.0 v8 sa well?? :wink:

more like the holden 6 was a weezy, under powered, chunk of shit and it was a stop gap engine

suzi-fan-22

Joined: Tue Nov 09, 2010 9:31 am
Posts: 499
Location: Ipswich
Vehicle: Sierra Ute '87 Sj70

Posted: Thu Sep 22, 2011 6:52 am

Pics? I had a look at one today and it looked like it would never fit
:crazy:

_________________
It's all coming together Armsup

SSSIERA

Joined: Tue Mar 22, 2011 1:26 pm
Posts: 1770
Location: Perth's RUF

Posted: Thu Sep 22, 2011 7:37 am

ive sorta got 3x R31 skyline wrecks! are there engine mounts any good for conversions?

_________________
THINKING BEFORE POSTING!!!

masterA

az supporter

Joined: Tue Jan 18, 2011 3:24 am
Posts: 976
Location: Perth

Posted: Thu Sep 22, 2011 11:01 pm

suzi-fan-22 wrote:

Pics? I had a look at one today and it looked like it would never fit
:crazy:

Yeah....thats what i thought too

Someone in the earlier posts mentioned just to grind the locating pin and it would be ok....while someone else mentioned to leave the locating pin and file away the engine mounting bracket.....

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Fri Sep 23, 2011 12:10 am

And right at the start of the thread someone pointed out it was the R30 NOT R31

_________________
Old farts sometimes know some stuff you don't.

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Fri Sep 23, 2011 2:27 am

R31 has the RB30 engine in it.

I dont know if they are the same mount though.

Grind the pin off. Im not sure why you would do it any other way.

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Fri Sep 23, 2011 4:13 am

Sorry BUT -

R30 = http://www.ebay.com.au/itm/HOLDEN-COMMO ... 058wt_1139

R31 = http://www.ebay.com.au/itm/HOLDEN-COMMO ... 818wt_1139

_________________
Old farts sometimes know some stuff you don't.

Reubs

Joined: Wed Sep 09, 2009 11:30 pm
Posts: 1522
Location: Brisbane
Vehicle: SJ80, SE416

Posted: Fri Sep 23, 2011 4:25 am

tonyevans wrote:

Sorry BUT -

R30 = http://www.ebay.com.au/itm/HOLDEN-COMMO ... 058wt_1139

R31 = http://www.ebay.com.au/itm/HOLDEN-COMMO ... 818wt_1139

The way I read both those listings is the first one is for an R31 engine mount, and the second one is for an R31 gearbox mount.

Nissan Skyline R31 / 3.0 VL Commodore (RB30 Engine) is the mount.

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Fri Sep 23, 2011 5:08 am

_________________
Old farts sometimes know some stuff you don't.

suzi-fan-22

Joined: Tue Nov 09, 2010 9:31 am
Posts: 499
Location: Ipswich
Vehicle: Sierra Ute '87 Sj70

Posted: Fri Sep 23, 2011 5:53 am

Just a pic to confirm?

_________________
It's all coming together Armsup

UBZ

Joined: Sun Nov 16, 2008 10:30 pm
Posts: 297
Location: NZ
Vehicle: LJ50 , LJ80Q-II

Posted: Fri Sep 23, 2011 7:59 am

canberramav wrote:

Grind the pin off. Im not sure why you would do it any other way.

the stock engine mounts have a locator pin.
It's there as it's a safety feature, to stop the mount rotating and potienionally allowing the engine to fall out if the mount fails.

the way to tell you have the right one is compare it to a stock one . the bolts are in the same positions

SSSIERA

Joined: Tue Mar 22, 2011 1:26 pm
Posts: 1770
Location: Perth's RUF

Posted: Fri Sep 23, 2011 10:15 am

hmmm my bro and his mates are renting this massive shed with two pits on large acerage.
anyways there are 3 r31 wrecks out there (soon to become one of awsome drift car), pluss multiple wrecks being contributed to the adjoining bush land/ quarries! ( we did not put the wrecks in the bush) daily. its just a matter of getting to them b4 kids decide to burn them!

but from what uve said i guess the r31 skylines engine mount for the rb30 is no good!

_________________
THINKING BEFORE POSTING!!!

suzi-fan-22

Joined: Tue Nov 09, 2010 9:31 am
Posts: 499
Location: Ipswich
Vehicle: Sierra Ute '87 Sj70

Posted: Fri Sep 23, 2011 2:14 pm

R30 = http://www.ebay.com.au/itm/HOLDEN-COMMO ... 058wt_1139

So this is the right one?

_________________
It's all coming together Armsup

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Fri Sep 23, 2011 8:41 pm

That look's like the one....

_________________
I used to be indecisive,
now I'm not so sure.....

Hybrid

az supporter

Joined: Mon Apr 21, 2008 11:30 pm
Posts: 1095
Location: Bulimba, Brisbane
Vehicle: '92 Sierra

Posted: Sat Sep 24, 2011 2:52 am

Had these sitting next to my computer for too long. you can see the locator pin on the RH one.

You do not have the required permissions to view the files attached to this post.

suzi-fan-22

Joined: Tue Nov 09, 2010 9:31 am
Posts: 499
Location: Ipswich
Vehicle: Sierra Ute '87 Sj70

Posted: Sun Sep 25, 2011 9:04 am

Thank you

_________________
It's all coming together Armsup

masterA

az supporter

Joined: Tue Jan 18, 2011 3:24 am
Posts: 976
Location: Perth

Posted: Fri Oct 14, 2011 1:12 am

Apparently there is a difference between the manual and automatic g/box mounts according to Repco....can anyone confirm or put the part number up?!

_________________
Fast,Cheap,Reliable-Pick 2 & 3rd is laughable

vandle

Joined: Sun May 10, 2009 11:30 pm
Posts: 50
Location: Brisbane

Posted: Fri Oct 14, 2011 2:25 am

the gear box mounts are different but the engine mounts are the same between the auto and manual cars.

:blink:

masterA

az supporter

Joined: Tue Jan 18, 2011 3:24 am
Posts: 976
Location: Perth

Posted: Fri Oct 14, 2011 4:47 am

vandle wrote:

the gear box mounts are different but the engine mounts are the same between the auto and manual cars.

:blink:

Thanks mate....i'll make sure the idiot is ordering the correct items first

Page 2 of 2

[ 58 posts ]

Go to page Previous 1, 2

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 295 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum