[mudbutton]

Just got head back, machined and with new valves, what order and tension do head bolts go? also machine shop said i had to adjust tappets?
Is there only one way for dissy to fit?
sierra 1.3. no, no, not the vitara! thanks for help.

[Boneheimer]

I can't tell you off the top of my head, but the most common response you'll get is to have a look for a factory service manual, for the sj413.
Just have a google and see if you can find one that covers your year model, always handy, especially if you're doing a rebuild.
This should cover most of the things you need to do to your sierra/engine.

Failing that i'm sure somebody here will know.

Somewhere like this http://www.suzukiinfo.com/

[steak_knife]

I tryed to upload a pdf, but it didn't work...

[DMAC]

Normally has it somewhere on the headgasket packaging. Both order and tension.

Dizzy will fit a heaps of ways but only one will work.

TDC on cylinder 1 on the compression stroke, Rotor goes to No. 1 spark plug lead.