| Author |
Message |
brettmeg
Joined: Thu Sep 22, 2011 3:31 am Posts: 51 Location: Blue Mountains NSW
|
 Posted: Mon Nov 14, 2011 3:05 am |
|
|
Guys I took the Jimny to the Wolgan Valley on Saturday went off the beaten track a few times. BUT every time the track came across anything that remotely became bogey or I reached a creek I decided to not risk it as I was along with no phone service.
This leads me to my point. Id like to get a winch. The Jimny already has a ARB winch bar on it so I guess thats a start. I called ARB and they want 1250 to supply and install a 8000 pound winch.
Ive looked on ebay and there are much cheaper winches than the ARB supplied Warn winch.
Any suggestions?
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Mon Nov 14, 2011 3:13 am |
|
|
If you're on a really tight budget you could buy a hand winch for 1/3 that amount...
Otherwise, maybe contact Dank and see what his winch prices are and fit it yourself...
|
|
|
|
 |
Mubby

az supporter
Joined: Sun May 09, 2010 2:32 am Posts: 988 Location: Brisbane, South.
Vehicle: Jimny, Lifted on 30's
|
 Posted: Mon Nov 14, 2011 3:15 am |
|
|
Well i dont have a winch yet, but i am planning on getting one soon! I go 4x4ing by myself alot and it would make me more confident of going down tracks and through mud.
Have a look at the Tiger 2 Winches i plan on getting the 6000 pound, which should be sufficient to pull out a jimny, also if its realy bad you can always put a block in as well.
Nick.
_________________ Jimny, 3" Lift, 30" Treps, Gears
|
|
|
|
 |
rpmwrx

az supporter
Joined: Sat Jul 19, 2008 11:30 pm Posts: 1303 Location: Geelong
Vehicle: JK Jeep, Sierra & Raptor
|
 Posted: Mon Nov 14, 2011 3:17 am |
|
Give Dank a call from KPD... he stocks tigerz11 and runva winches which are very reasonably prices. If I didn't already have a premier winch i would be looking at the runva winches... hope that helps 
|
|
|
|
 |
monley

az supporter
Joined: Wed Nov 24, 2010 7:58 am Posts: 11092 Location: Mandurah.W.A.
Vehicle: 84 LWB NT
|
 Posted: Mon Nov 14, 2011 3:49 am |
|
|
I've got a tigerz11 9000lb winch on my jimny .....only way to go....
_________________ Tell my arse, he actually gives a crap!
|
|
|
|
 |
brettmeg
Joined: Thu Sep 22, 2011 3:31 am Posts: 51 Location: Blue Mountains NSW
|
 Posted: Mon Nov 14, 2011 4:05 am |
|
rpmwrx wrote: Give Dank a call from KPD... he stocks tigerz11 and runva winches which are very reasonably prices. If I didn't already have a premier winch i would be looking at the runva winches... hope that helps 
KPD whats that? Sounds promising
|
|
|
|
 |
cooo
Joined: Mon Jul 11, 2011 8:33 am Posts: 88 Location: melbourne
|
 Posted: Mon Nov 14, 2011 5:03 am |
|
|
just pm dank, hes on here, i got a winch from him, i recommend him
|
|
|
|
 |
dank
Joined: Sat Apr 05, 2008 10:30 pm Posts: 1157 Location: VIC
Vehicle: WR250F/Jeep XJ
|
 Posted: Mon Nov 14, 2011 5:04 am |
|
yeah send me a PM with your location and what you think you need then I'll give you some options buddy.
Thanks for the referrals team 
_________________ LIKE US ON FACEBOOK - KPD4x4
|
|
|
|
 |
jimny_timmy

az supporter
Joined: Fri May 13, 2011 1:56 am Posts: 2326
Vehicle: Suzuki Jimny 2010
|
 Posted: Mon Nov 14, 2011 5:21 am |
|
dank wrote: yeah send me a PM with your location and what you think you need then I'll give you some options buddy. Thanks for the referrals team 
Another referral here...Winch and springs from Dan, Excellent!!! service both times!
|
|
|
|
 |
dank
Joined: Sat Apr 05, 2008 10:30 pm Posts: 1157 Location: VIC
Vehicle: WR250F/Jeep XJ
|
 Posted: Mon Nov 14, 2011 6:04 am |
|
|
The easiest/cheapest/half decent bolt in option is the 9000lb Tigerz11 winch.
The other options are the 6000lb tigerz11 winch which is a beast of a 6000lber compared to the others, but you'll need to mod the mounting holes to make it work. Not hard to do and they are cheaper as well.
_________________ LIKE US ON FACEBOOK - KPD4x4
|
|
|
|
 |
squibby
Joined: Wed May 11, 2011 3:13 am Posts: 645 Location: Brisbane
Vehicle: On the lookout
|
 Posted: Mon Nov 14, 2011 8:26 pm |
|
|
I have the 5000lbs Tigerz 11.
The thing with the Tigerz winches is they are cheap but you can trust the rating. 5000lbs means 5000lbs minimum, no less.
To be honest though, my tigerz is a bit temperamental when you first start using, it takes a few clicks on the controller before it start motoring which doesn't inspire confidence, but it hasn't let me down yet. Get yourseld a $30 block and you can double up the power of any winch, so I've got 10,000lbs at my desposal and my jimny only weighs about 1500lbs.
_________________ Crispy old grand vitara
|
|
|
|
 |
agrajagzz9

az supporter
Joined: Wed Nov 02, 2011 12:16 am Posts: 42 Location: Townsville, QLD
Vehicle: 2007 Suzuki Jimny JLX
|
 Posted: Mon Nov 14, 2011 8:45 pm |
|
squibby wrote: my jimny only weighs about 1500lbs.
Stock jimny weighs just over 1000kg, or 2200lbs. with your bb, winch, rear bumper etc, i would think you would be closer to 2500lbs. but still much less than the winch capacity.
|
|
|
|
 |
squibby
Joined: Wed May 11, 2011 3:13 am Posts: 645 Location: Brisbane
Vehicle: On the lookout
|
 Posted: Mon Nov 14, 2011 8:48 pm |
|
|
^^
thanks, 2500lbs is familiar actually, I think I'm confusing my kg's and lbs!
_________________ Crispy old grand vitara
|
|
|
|
 |
Total_Filth
Joined: Sun Nov 06, 2011 12:36 am Posts: 146 Location: Melbourne, VIC
Vehicle: 02 Suzuki Jimny
|
 Posted: Mon Nov 14, 2011 9:03 pm |
|
|
Another vote for Tigerz11..... 9k pounder will do you finely.
And get the dyneema rope..... heaps lighter and you'll be kicking yourself if ever you have to haul a wire winch rope through a waist deep bog hole.....
Trust me, i made that mistake the first time.
TF
|
|
|
|
 |
brettmeg
Joined: Thu Sep 22, 2011 3:31 am Posts: 51 Location: Blue Mountains NSW
|
 Posted: Mon Nov 21, 2011 12:39 am |
|
|
|
 |
bohuler

az supporter
Joined: Wed Nov 10, 2010 9:18 am Posts: 1376 Location: Avonsleigh, Victoria
|
 Posted: Mon Nov 21, 2011 12:59 am |
|
Definatly not. If your happy to spend $300 on a winch that is over the top for jimmy, along with ZERO after sales service, ya bonkers!
http://auszookers.com/index.php?name=Fo ... ic&t=20219
It make seem like you are spending a shitload more on a tigerz, but when the 'cheap' ebay one packs itself up, you are still stuck in buttfruck idaho, and your $300 outta pocket. Put the money towards a winch that is reliable, has a full range of cheap spare parts and buy from someone who will look after you if the winch does play up for any reason.
Just my 2c worth...
Dave
p.s Thats another slab of beer ya owe me Dank 
_________________ Life's short, fiddle with your willy while you can
|
|
|
|
 |
bohuler

az supporter
Joined: Wed Nov 10, 2010 9:18 am Posts: 1376 Location: Avonsleigh, Victoria
|
 Posted: Mon Nov 21, 2011 1:01 am |
|
And also, 42kg hanging off the front of a jimmy......  Thats not gonna mess with your suspension, not at all....
_________________ Life's short, fiddle with your willy while you can
|
|
|
|
 |
brettmeg
Joined: Thu Sep 22, 2011 3:31 am Posts: 51 Location: Blue Mountains NSW
|
 Posted: Mon Nov 21, 2011 2:48 am |
|
|
Dank will be getting my cash. I PM'ed him awhile ago. They seem to be the way to go
|
|
|
|
 |
honks
Joined: Tue Apr 20, 2010 11:30 pm Posts: 214 Location: ipswich
|
 Posted: Mon Nov 21, 2011 10:12 am |
|
|
there is some tigers 6000lb winches on ebay but with out the tigers stickers on them for around the $300 the other week had 5.5 hp motor and synthetic rope, they had tigers ones listed directly below for nearly 200 more and they looked identical minus the stickers
|
|
|
|
 |
|