| Author |
Message |
bohuler

az supporter
Joined: Wed Nov 10, 2010 9:18 am Posts: 1376 Location: Avonsleigh, Victoria
|
 Posted: Wed Nov 16, 2011 7:15 am |
|
I'm getting my new zook on Saturday and just wondering what the diff ratio is for my GV? I have done a net search and can't seem to find it. Maybe I need to learn how to search properly
Dave
_________________ Life's short, fiddle with your willy while you can
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Wed Nov 16, 2011 7:17 am |
|
|
slaughto or emanuel
_________________ You're just hating because you don't understand
|
|
|
|
 |
bohuler

az supporter
Joined: Wed Nov 10, 2010 9:18 am Posts: 1376 Location: Avonsleigh, Victoria
|
 Posted: Wed Nov 16, 2011 7:31 am |
|
emanuel 
_________________ Life's short, fiddle with your willy while you can
|
|
|
|
 |
remydog05
Joined: Sun Nov 23, 2008 10:30 pm Posts: 1260 Location: Vic
|
 Posted: Wed Nov 16, 2011 7:31 am |
|
|
Wont they be 4.6 for auto and 4.8 manual??
|
|
|
|
 |
bohuler

az supporter
Joined: Wed Nov 10, 2010 9:18 am Posts: 1376 Location: Avonsleigh, Victoria
|
 Posted: Wed Nov 16, 2011 7:33 am |
|
No idea rob. i want to do the vitara upgrade with free wheeling hubs and jas thought they were 5.2's but i couldnt find any info so i thought i'd just ask
Dave
_________________ Life's short, fiddle with your willy while you can
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Wed Nov 16, 2011 7:34 am |
|
|
did a bit of a search and i found this....
early 1.6swb GV's had 5.12
2.0l man gv = 4.8
2.0l auto GV = 5.12
2.5 V6 man = 4.3
2.5 V6 auto = 4.8.
You can use the vitara / X90 10bolt diffs in the front and 12bolt in the rear
Vitara ratios are 4.6, 4.8 and 5.12
Sierra lockrights can be used in either diff.
Air lockers are GV or Vitara.
Axles are 26 spline.
T/case gearing is available but only gives reduction in low range.
so if you want to go bigger tyres then find yourself some 5.12 diffs.
I have 5.12 front and rear. Front still has the air engagement.
You GV should have 4.8 diffs
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
foonji
Joined: Sun Nov 01, 2009 10:30 pm Posts: 1286
Vehicle: Suzuki
|
 Posted: Sat Dec 31, 2011 10:49 am |
|
|
I'm looking at 5.12 gears for my GV. Were they are straight swap B4T?
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sat Dec 31, 2011 10:57 am |
|
|
you'll need to have the front 5.12 built into your steel housing, rear should bolt in.
_________________ You're just hating because you don't understand
|
|
|
|
 |
foonji
Joined: Sun Nov 01, 2009 10:30 pm Posts: 1286
Vehicle: Suzuki
|
 Posted: Sat Dec 31, 2011 11:07 am |
|
|
I have the aluminium housing... is that going to screw me?
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Sun Jan 01, 2012 7:53 am |
|
foonji wrote: I have the aluminium housing... is that going to screw me?
No .
the alloy housing is the same as the steel one but just not as strong.
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
foonji
Joined: Sun Nov 01, 2009 10:30 pm Posts: 1286
Vehicle: Suzuki
|
 Posted: Sun Jan 01, 2012 10:20 am |
|
No worries, think I may have a steel housing if it is so. Shep is checkin out a local gv wreck this week. 
|
|
|
|
 |
|