| Author |
Message |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Sun Jun 19, 2011 3:12 am |
|
I have some 30mm coil spacers for a Jimny. These will lift a jimny by 30mm when installed above coils.
They also fit the front of a GV or Vitara and will lift it about 60mm
Not sure it they fit coily sierra.
$60 for a pair or $100 for all 4. Plus $15 post Australia wide.

_________________ B4T
Built by me to be driven like a rental
Last edited by Built4thrashing on Thu Nov 17, 2011 10:34 pm, edited 1 time in total.
|
|
|
|
 |
redrocketsj50

az supporter
Joined: Wed May 19, 2010 9:20 am Posts: 268 Location: Sale victoria
|
 Posted: Sun Jun 19, 2011 6:43 am |
|
|
All four sold to me if they fit a coily Anyone no?
_________________ Sj80,31 claws, lift, winch, 6.5
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Sun Jun 19, 2011 10:55 am |
|
|
_________________ B4T
Built by me to be driven like a rental
Last edited by Built4thrashing on Sun Jun 19, 2011 11:39 am, edited 1 time in total.
|
|
|
|
 |
redrocketsj50

az supporter
Joined: Wed May 19, 2010 9:20 am Posts: 268 Location: Sale victoria
|
 Posted: Sun Jun 19, 2011 11:26 am |
|
|
UnSold sorry bft
_________________ Sj80,31 claws, lift, winch, 6.5
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Mon Jun 20, 2011 8:08 pm |
|
|
I still have these. Want them home so I can buy something else for the GV.
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
fritter

az supporter
Joined: Sun Sep 19, 2010 9:30 am Posts: 1163 Location: Wahroonga NSW
Vehicle: 89 Vit. The Desert Rat...
|
 Posted: Mon Jun 20, 2011 10:27 pm |
|
|
Do they only fit the front of a Vit?
I'd need something for the back as well.
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Tue Jun 21, 2011 12:44 am |
|
|
coils are smaller in the rear of a GV and Vit. These wont fit sorry.
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Wed Nov 16, 2011 8:16 am |
|
|
bump.
Forgot i still had these.
Price drop to $100 for the 4.
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Wed Nov 16, 2011 11:07 am |
|
|
my coils appear same front and rear.
I switched my first set front to rear without issue.
|
|
|
|
 |
Shorty_34
Joined: Wed Sep 14, 2011 11:40 am Posts: 57 Location: Mailtand
|
 Posted: Wed Nov 16, 2011 5:48 pm |
|
|
So they will fit a lwb vitara or not?
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Wed Nov 16, 2011 8:01 pm |
|
Shorty_34 wrote: So they will fit a lwb vitara or not?
Hard to say from photo.
Rear of Vit needs twice the size of front,
for the same lift,
because of the inboard spring position of front.
(I have 25mm in front and 50mm in rear = 50mm lift both ends)
I see from photo they have a spring locating groove,
min e don't,
that could be the difference.
Bruce makes coil spacers, he may have the answer.
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Wed Nov 16, 2011 10:40 pm |
|
|
I know they dont fit the rear of a GV. They do fit the front but will lift the front by 60mm. a tad too much when combined with 40mm lift springs.
Not sure about the Vits Might have to pay chris a visit to see how they are different
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
Shorty_34
Joined: Wed Sep 14, 2011 11:40 am Posts: 57 Location: Mailtand
|
 Posted: Thu Nov 17, 2011 4:09 am |
|
christover1 wrote: Shorty_34 wrote: So they will fit a lwb vitara or not? Hard to say from photo. Rear of Vit needs twice the size of front, for the same lift, because of the inboard spring position of front. (I have 25mm in front and 50mm in rear = 50mm lift both ends) I see from photo they have a spring locating groove, min e don't, that could be the difference. Bruce makes coil spacers, he may have the answer.
Righto awsome, sorry I dont know many people on here yet, so who is bruce?
|
|
|
|
 |
bailey08
Joined: Fri Oct 23, 2009 10:30 pm Posts: 257 Location: Brisbane North
Vehicle: 02 GV
|
 Posted: Thu Nov 17, 2011 6:19 am |
|
|
on my vit i was able to swap front to rear
on my gv i can't. rears are slightly smaller in diameter.
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Thu Nov 17, 2011 8:50 am |
|
bailey08 wrote: on my vit i was able to swap front to rear
on my gv i can't. rears are slightly smaller in diameter.
Ok then that asnwers that.
These will fit a Vitara.
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Thu Nov 17, 2011 10:38 pm |
|
|
lots of interest in these so first in gets them.
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
jonno_racing

az supporter
Joined: Wed Apr 15, 2009 11:30 pm Posts: 8164 Location: Tassie
Vehicle: suzuki
|
 Posted: Thu Nov 17, 2011 11:03 pm |
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Thu Nov 17, 2011 11:22 pm |
|
jonno_racing wrote: they will fit the rear of a sj80
NFI. you tell me as i dont own or have one to check. Does a SJ80 use the same coil spacers as a jimny,vitara or GVfronts?
If they do then id say they would.
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
jonno_racing

az supporter
Joined: Wed Apr 15, 2009 11:30 pm Posts: 8164 Location: Tassie
Vehicle: suzuki
|
 Posted: Thu Nov 17, 2011 11:41 pm |
|
Built4thrashing wrote: jonno_racing wrote: they will fit the rear of a sj80 NFI. you tell me as i dont own or have one to check. Does a SJ80 use the same coil spacers as a jimny,vitara or GVfronts? If they do then id say they would.
that was ment to say they WILL sorry i dont want them, just helping with the sale mate
_________________ Do cool stuff, Put it on the internet Sierra build, Jimny build https://www.youtube.com/user/redzook1
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Fri Nov 18, 2011 7:39 am |
|
|
Sold pending payment
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
Total_Filth
Joined: Sun Nov 06, 2011 12:36 am Posts: 146 Location: Melbourne, VIC
Vehicle: 02 Suzuki Jimny
|
 Posted: Mon Dec 12, 2011 12:00 am |
|
|
I assume that payment went through alright mate? Otherwise i'm interested.
TF
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Mon Dec 12, 2011 12:38 am |
|
|
yes these are sold.
BUT
i found a 30mm spacer lift for a Vitara in the cuboard
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
Total_Filth
Joined: Sun Nov 06, 2011 12:36 am Posts: 146 Location: Melbourne, VIC
Vehicle: 02 Suzuki Jimny
|
 Posted: Mon Dec 12, 2011 1:08 am |
|
|
Haha damn. that won't suit me....
Unless they fit a jimny?
TF
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Mon Dec 12, 2011 9:39 am |
|
|
They will but one set is 30mm and the other is only 15mm
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
|