| Author |
Message |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Thu Dec 08, 2011 2:18 am |
|
|
Hey guys, selling this on behalf of a friend
NOW PARTING
Pricing is as follows
Front diff complete, has new calipers, pads, hub seals, tie rod ends etc $200
Rear diff complete $200
Front Radius arms, straight $100
Rear Radius arms, straight $100
Gearbox SOLD PENDING PAYMENT
Transfer $100
Near perfect head $100
alternator $40
fuel pump $40
Parts that are sold
chassis
carb
wheels/tyres
steering box
fuel tank
Will have some of my own left over stuff soon with pics including
tow bar
brand new water pump unused
half bar with side steps and protector rails, designed to mount to standard steel bar
Name a price on any other parts you see that you are interest in. Prices are currently fix but as time goes will be more towards ONO
Currently located at Pinkenba, can deliver to local area.
Mobile 0417071082, ask for Garry
Or send me a PM
You do not have the required permissions to view the files attached to this post.
Last edited by Fmoss3 on Wed Jan 11, 2012 2:01 am, edited 20 times in total.
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Thu Dec 08, 2011 2:20 am |
|
|
more pics
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Thu Dec 08, 2011 3:18 am |
|
|
Hey mate.
What will he take for the fuel tank?
To be honest he will be flat out getting $800 for that roller. The diffs are worth next to nothing and hard to sell, the arms will sell if they are straight, the engine would fetch $200-300 inc head etc, gearbox $150-250 depending on condition, the chassis is worthless, so is the transfercase and suspension.
Was this rolled? or did he buy it for the tub?
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Thu Dec 08, 2011 3:37 am |
|
|
Hey mate
I believe that the cab had been taken off it for a cut job at some point.
Dont believe he'd be selling the tank separately but if anything changes, you'll be first on the list.
He is looking at getting one of JML's sierra bar's or an ARB one so a good bar could be considered in the price
|
|
|
|
 |
jonno_racing

az supporter
Joined: Wed Apr 15, 2009 11:30 pm Posts: 8164 Location: Tassie
Vehicle: suzuki
|
 Posted: Thu Dec 08, 2011 4:09 am |
|
|
the rear diff will sell, as they bend and have week axels...
but id say more around the $800.
_________________ Do cool stuff, Put it on the internet Sierra build, Jimny build https://www.youtube.com/user/redzook1
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Thu Dec 08, 2011 6:58 am |
|
well i spoke with him, he said it owes him about $1500, all bearings, gear box and axle are all good. Bottom he'll take atm is $1000 otherwise he's better off getting a new cab for it.
Would be good to put a moke body on 
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Sun Dec 11, 2011 1:48 am |
|
|
bump, everyone says $800 so that sounds good
|
|
|
|
 |
SSSIERA
Joined: Tue Mar 22, 2011 1:26 pm Posts: 1770 Location: Perth's RUF
|
 Posted: Sun Dec 11, 2011 2:06 am |
|
|
other half of a coily is on gumtree for 1000 bucks in perth! no engine or gearbox
_________________ THINKING BEFORE POSTING!!!
|
|
|
|
 |
juzzys

az supporter
Joined: Thu Aug 18, 2011 12:09 am Posts: 142 Location: burp's on the north side
Vehicle: 88 1ltr zook
|
 Posted: Sun Dec 11, 2011 2:07 am |
|
|
anyone know of a coily cab for sale??
_________________ when boredom sets in ....
|
|
|
|
 |
jimbo_jones

az supporter
Joined: Sat Jul 19, 2008 11:30 pm Posts: 4361 Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti
|
 Posted: Sun Dec 11, 2011 3:31 am |
|
juzzys wrote: anyone know of a coily cab for sale??
um did you read the post above yours??? ^^^^^ 
|
|
|
|
 |
charlie
Joined: Thu Jun 12, 2008 11:30 pm Posts: 50 Location: Ipswich
|
 Posted: Sun Dec 11, 2011 4:06 am |
|
|
Whats the motor like if ok condition how much for the motor.
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Mon Dec 12, 2011 1:36 am |
|
Bump
charlie wrote: Whats the motor like if ok condition how much for the motor.
As the ad says, motor is in good condition but has a score in the bore. currently has no piston heads or bearings/rings etc
edit - sorry haven't got a price yet as wasn't previously parting, i'll find out and put it up asap
also i believe it has a webber on it and with the exception to bearings/rings and piston heads, is complete e.g. fuel pump, alternator...
|
|
|
|
 |
mr.green
Joined: Mon Oct 26, 2009 10:30 pm Posts: 426 Location: Tamworth
|
 Posted: Mon Dec 12, 2011 7:51 am |
|
Fmoss3 wrote: As the ad says, motor is in good condition but has a score in the bore. currently has no piston heads or bearings/rings etc
 sorry dude but that is funny 
_________________ Ive promised roughness and damn it, i will deliver
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Mon Dec 12, 2011 12:52 pm |
|
mr.green wrote: Fmoss3 wrote: As the ad says, motor is in good condition but has a score in the bore. currently has no piston heads or bearings/rings etc
 sorry dude but that is funny 
well basically what i mean is that its complete and was running well. head, cam, dizzy, alternator, starter etc are all good.
the mark in the bore may not be that bad, im not a professional engine builder but i'd suggest the block is munted. judging by the design im guessing you cant bore it our or sleave it, more likely its easier to get another block but yeah.
can be bought as a whole or might be separated
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Wed Dec 14, 2011 12:04 am |
|
|
|
 |
juzzys

az supporter
Joined: Thu Aug 18, 2011 12:09 am Posts: 142 Location: burp's on the north side
Vehicle: 88 1ltr zook
|
 Posted: Thu Dec 15, 2011 7:10 am |
|
jimbo_jones wrote: juzzys wrote: anyone know of a coily cab for sale?? um did you read the post above yours??? ^^^^^ 
if you read the time we posted at around the same time.. 
_________________ when boredom sets in ....
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Sun Dec 18, 2011 7:43 pm |
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Mon Dec 19, 2011 3:08 am |
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Wed Dec 21, 2011 1:16 am |
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Wed Dec 21, 2011 2:44 am |
|
|
give ya $50 for the front diff
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Wed Dec 21, 2011 2:57 am |
|
tanshi wrote: give ya $50 for the front diff
umm, no
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Wed Dec 21, 2011 3:35 am |
|
|
when you still have it in 6 months let me know
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Wed Dec 21, 2011 3:59 am |
|
is that like offering something_else 2 grand for his LJ81 ute?
everyone is entitled to their opinions and make stupid low ball offers.
Fatzook said the chassis was worthless, yet it was the first thing to sell. Thats not a go a Fatzook, its just that in his opinon and to him the chassis was useless but thankfully we live in a world where everyone isn't the same, have the same needs or share the same opinons.
If the entire front diff assembly is still for sale in 6 months, you can have it for $300 
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Wed Dec 21, 2011 4:24 am |
|
|
parts are worth what people will pay.
a good pair of WT sierra diffs are worth, $400. and are in alot more demand than coily diffs,
a good pair of LJ diffs are worth $200 a pair and are alot more demanded than coily diffs,
how the hell are coily diffs in any ones opinion worth $600 a pair??
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Wed Dec 21, 2011 4:26 am |
|
tanshi wrote: parts are worth what people will pay.
a good pair of WT sierra diffs are worth, $400. and are in alot more demand than coily diffs,
a good pair of LJ diffs are worth $200 a pair and are alot more demanded than coily diffs,
how the hell are coily diffs in any ones opinion worth $600 a pair??
Depends how bad you need one  They are a weak unit and break mounts etc all day long.
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Wed Dec 21, 2011 4:28 am |
|
|
All the more reason not to buy another one *shrugs*
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Wed Dec 21, 2011 5:00 am |
|
tanshi wrote: All the more reason not to buy another one *shrugs*
What options would you suggest for coily owners then  Add an equally weak jimny diff. Or fabricate a leafy diff (not an easy job!!)
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Wed Dec 21, 2011 5:10 am |
|
|
speaking of which, i just sold a front and a rear jimny diff centre which had surface rust on them for $100 the pair to a Gearbox place i send a lot of work to. he reckons cleaned up he will sell them for in excess of $500 for both. you can argue that they are worth nothing all you like but i think i'd take his opinion.
gave me cash on the spot and was happy as a pig in shit. and you want to offer $50 for a full front diff with new hub seals, rotors etc?
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Wed Dec 21, 2011 5:17 am |
|
|
From a company you expect to have to pay rediculous amounts, cos the come with some sort of warranty.
second had off the net with unknown condition is a long way from paying what a gearbox shop charges.
|
|
|
|
 |
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
 Posted: Wed Dec 21, 2011 5:20 am |
|
|
thats right, and he took $50 cash for a jimny front diff with surface rust on the gears.
im offering a complete front diff in good working condition with everything on it.
edit - good working calipers and near new rotors would nearly be worth $50
|
|
|
|
 |
|