| Author |
Message |
bazzok
Joined: Sun Aug 22, 2010 4:18 am Posts: 41 Location: petrie
|
 Posted: Fri Apr 13, 2012 5:11 pm |
|
|
do you have front right guard and head lights
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34843 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Fri Apr 13, 2012 5:30 pm |
|
sogone wrote: Actually. Just the efi one. The carby center is only 4.6's. FYI carby manual SWB vit is 5.12:1
_________________ You're just hating because you don't understand
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Fri Apr 13, 2012 8:18 pm |
|
atari4x4 wrote: sogone wrote: Actually. Just the efi one. The carby center is only 4.6's. FYI carby manual SWB vit is 5.12:1 Correct. Only the trimatic auto had the odd ratio.
|
|
|
|
 |
sogone

az supporter
Joined: Mon Oct 25, 2010 11:29 am Posts: 2070 Location: Darwin
|
 Posted: Fri Apr 13, 2012 8:18 pm |
|
|
Fck. Can you bladdy vit owners sort ya shit out. Is Joe wrong in his post Gus?
|
|
|
|
 |
sogone

az supporter
Joined: Mon Oct 25, 2010 11:29 am Posts: 2070 Location: Darwin
|
 Posted: Fri Apr 13, 2012 8:19 pm |
|
|
If Gus is correct I'll take both 5.12 fronts!!!
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34843 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Fri Apr 13, 2012 8:20 pm |
|
sogone wrote: Fck. Can you bladdy vit owners sort ya shit out. Is Joe wrong in his post Gus? who's Joe  and has the arb bar on the SWB sold yet?
_________________ You're just hating because you don't understand
|
|
|
|
 |
sogone

az supporter
Joined: Mon Oct 25, 2010 11:29 am Posts: 2070 Location: Darwin
|
 Posted: Fri Apr 13, 2012 8:23 pm |
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34843 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Fri Apr 13, 2012 8:29 pm |
|
he says the carby auto swb is 4.6.... nothing about carby manual swb's which are 5.1 
_________________ You're just hating because you don't understand
|
|
|
|
 |
sogone

az supporter
Joined: Mon Oct 25, 2010 11:29 am Posts: 2070 Location: Darwin
|
 Posted: Fri Apr 13, 2012 8:37 pm |
|
|
He didn't say that swb manuals were 5.12s! Misleading vitara gypsies.
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Fri Apr 13, 2012 8:37 pm |
|
atari4x4 wrote: sogone wrote: Fck. Can you bladdy vit owners sort ya shit out. Is Joe wrong in his post Gus? who's Joe  and has the arb bar on the SWB sold yet? Joe wrote: All 1.6 efi swb manuals or autos have 5.12's All 1.6 lwb manuals or autos have 5.12's Swb 1.6 carby auto are 4.6's (i think) So that clarifys it for everyone... only 3 spd auto (carby models only) is 4.6. All other SE416 are 5.12 ratio. As per the original post the ARB bar aint up for sale. Don't have $1100 to replace it and parting stuff for cheap aint going to buy me another one. I'll take $120 each for front diffs. As per the original post all items are 'Pickup Only' - that way it keeps everybody happy. I'd rather someone can inspect the item in person before they hand over their cash, rather than open a can of worms if anything goes wrong.
|
|
|
|
 |
sogone

az supporter
Joined: Mon Oct 25, 2010 11:29 am Posts: 2070 Location: Darwin
|
 Posted: Fri Apr 13, 2012 8:38 pm |
|
|
Fuck. Counts me out. Good luck with the sale.
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Fri Apr 13, 2012 8:39 pm |
|
bazzok wrote: do you have front right guard and head lights Yup. $50 for a front right guard. $20 each for headlights. I'll send you a PM with my details. Reubs
|
|
|
|
 |
daniel_rsj
Joined: Sat Feb 11, 2012 4:44 pm Posts: 13
Vehicle: '94 vitara jx lwb 5 door
|
 Posted: Sat Apr 14, 2012 5:38 pm |
|
|
Gday,
do you still have the front left brake calipers for sale?
Cheers
Daniel
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 12997 Location: Melbourne
|
 Posted: Sat Apr 14, 2012 7:24 pm |
|
sogone wrote: Actually. Just the efi one. The carby center is only 4.6's. Carby auto is 4.6 Carby manual is 5.12 1.6 EFI auto 5.12 1.6 EFI manual 5.12 Steve.
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Sun Apr 15, 2012 1:00 pm |
|
daniel_rsj wrote: Gday, do you still have the front left brake calipers for sale? Cheers Daniel Hi Daniel, None to suit LWB - I see in your profile it says you have a LWB. Only have SWB (non-vented) brakes for sale. As per the first post in this thread I am keeping the LWB's front brakes. I have about 3 sets of SWB brakes actually if anyone wants non-vented rotors and calipers from the SWB Vit/Coily Sierra. Reubs
|
|
|
|
 |
Teracis
Joined: Sat Dec 11, 2010 10:03 pm Posts: 2261 Location: Gold Coast
Vehicle: Daisy
|
 Posted: Sun Apr 15, 2012 1:21 pm |
|
|
I've been toying with the idea of dual transfers and vit gearbox, any chance you still have a gearbox and transfer going cheap?
no matter if you don't, it's probably more work than I should bother with.
EDIT: The manual, I have no want for auto :p
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Sun Apr 15, 2012 1:40 pm |
|
Teracis wrote: I've been toying with the idea of dual transfers and vit gearbox, any chance you still have a gearbox and transfer going cheap? no matter if you don't, it's probably more work than I should bother with. EDIT: The manual, I have no want for auto :p Hi Teracis, Actually I do have one CHEAP. $80 for the SWB manual box and transfer. I'll explain why it's only $80. The manual box has a problem with the oil filler plug. Most of the filler plug thread has been stripped (on the box) and it leaks oil even with thread tape applied. If you can either tap it for a larger plug or weld it up or just not worry about it then it's ok. I suspect the transfer needs a new rear output shaft bearing - I replaced the seal and it started leaking a short time later. The front seal/bearing is good. Teracis, please sned me a PM if you are interested. Reubs.
|
|
|
|
 |
ken93
Joined: Sat Feb 19, 2011 11:18 pm Posts: 17 Location: Caloundra, QLD
Vehicle: 93 lwb vitara
|
 Posted: Tue Apr 17, 2012 12:10 pm |
|
|
Hey im after 4 rims (with or without tyres) fuel tank and drivers front and rear doors and starter motor, (lwb)
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Thu Apr 19, 2012 1:54 pm |
|
ken93 wrote: Hey im after 4 rims (with or without tyres) fuel tank and drivers front and rear doors and starter motor, (lwb) Hi Ken93, How's $50 for each LWB drivers/side door and $80 for a set of 4 Vitara steel teardrop style rims with legal Hankook h/t tyres sound (rims/tyres as pictured on the SWB)? I can have them ready for you this weekend.Sorry, the LWB (EFI) starter is gone. I have a carby one here but they are different. I also have a range of other suzuki rims available (5x WT round hole steel, 4x coily round hole steel, and a lot of odd ones). I also have a better set of 5x Toyo radial tyres (4x just tyres and matching 1x tyre on a vit rim) available for $50. I'll send you a PM with my details. Reubs
|
|
|
|
 |
Auto Art
Joined: Mon Jul 30, 2012 3:06 pm Posts: 1
Vehicle: Suzuki Sierra
|
 Posted: Mon Aug 27, 2012 8:13 pm |
|
|
Hey Reubs... My Dad needs Vit Bits... But he's not an internet bloke like us. Rather than get caught in the middle can you please send me your number so he can call you.
Thanks Braden
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Mon Aug 27, 2012 10:04 pm |
|
Auto Art wrote: Hey Reubs... My Dad needs Vit Bits... But he's not an internet bloke like us. Rather than get caught in the middle can you please send me your number so he can call you.
Thanks Braden PM Sent
|
|
|
|
 |
vitara1995
Joined: Mon Sep 17, 2012 4:57 pm Posts: 11
Vehicle: vitara
|
 Posted: Mon Sep 17, 2012 5:16 pm |
|
|
hey mate just wondering if the front left cv hub brake protector and brake caliper and door trims are still available if so pleas send me a price and location on where to pick up thanks
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Mon Sep 17, 2012 6:35 pm |
|
vitara1995 wrote: hey mate just wondering if the front left cv hub brake protector and brake caliper and door trims are still available if so pleas send me a price and location on where to pick up thanks PM Sent
|
|
|
|
 |
055ETH
Joined: Sun Oct 23, 2011 9:05 pm Posts: 383 Location: Brisbane
Vehicle: 94 Sierra,99 gv, s13 Silvia
|
 Posted: Mon Sep 17, 2012 7:03 pm |
|
|
|
 |
podger
Joined: Wed Jun 20, 2012 8:03 pm Posts: 32
Vehicle: 1990 swb vitara 1.6 5speed
|
 Posted: Mon Sep 17, 2012 7:38 pm |
|
|
|
 |
Samwich
Joined: Thu Jun 07, 2012 2:13 pm Posts: 1125 Location: Canberra
Vehicle: Vit swb 95
|
 Posted: Tue Sep 18, 2012 3:57 pm |
|
|
seat belt (where you click it in) swb?
How much to Canberra
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Tue Sep 18, 2012 5:20 pm |
|
055ETH wrote: Starter motor No starter motors left sorry.
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Tue Sep 18, 2012 5:21 pm |
|
podger wrote: radiator No radiators left sorry.
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Tue Sep 18, 2012 5:21 pm |
|
Samwich wrote: seat belt (where you click it in) swb?
How much to Canberra Pick up only sorry.
|
|
|
|
 |
nemesis2187
Joined: Sat Mar 12, 2011 8:54 pm Posts: 54 Location: Brisbane
|
 Posted: Sun Sep 23, 2012 8:38 am |
|
|
its a long shot, but just wanted to know if u have the COMPLETE power steering setup so i can put into my sierra also the air con setup
|
|
|
|
 |
|