auszookers.com • View topic - Transfer and gearbox breathers

Board index » Talking About Stuff » Suzuki Talk

Transfer and gearbox breathers

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

Deego

Joined: Fri Mar 23, 2012 11:04 am
Posts: 187
Vehicle: Suzuki sierra

Posted: Thu May 17, 2012 7:03 pm

Has any one wrote information about how to install transfer and gearbox breathers

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Thu May 17, 2012 7:07 pm

viewtopic.php?f=14&t=6031

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

mrw82

az supporter

Joined: Tue Jul 03, 2007 11:30 pm
Posts: 1350
Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre

Posted: Thu May 17, 2012 7:57 pm

No, nobody has done it. If you could take pics as you do it and post up a bit of a write up that'd be great.

jonfromhamilton

Joined: Mon Dec 26, 2011 2:11 pm
Posts: 410
Location: Pakenham
Vehicle: SJ51T

Posted: Fri May 18, 2012 7:57 pm

I did my transfer case breather the other day it was piss easy.
1 x brass 0.25" BSP brass fitting
little filter i got that usually goes on a lawnmower.
the 0.187" fuel line I think is too thin it is too restricitive and I didn't want to pay for the 0.375" tube at $13/m so I am yet to source some hose.
the factory breather just needs to be tapped which is super easy as the t-case is aluminium then I put some teflon tape (only a thin ammount) on the brass thread and soem aircraft glue ($4 per bottle at bursons) and voila.

_________________
Humble beginnings

Page 1 of 1

[ 4 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 85 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum