[Rossco]

where is the return fuel line on g16b? I know there is one but I cant find it. I've traced the whole fuel system.

[BlueSuzy]

Baleno G16b's are right next to the main pressure. Smaller barb fitting.

[Rossco]

sorry mines a vit g16b, but Ive been looking for a small barb. it is on the front or back of the engine? maybe I've hooked something up wrong.

[JrZook]

Locate the fuel regulator on the fuel rail at the front of the engine. There should be a small metal line that runs from it to the back of the engine.

Fuel inlet -> fuel rail -> fuel reg-> return

[Rossco]

ok I thought that was where fuel when into the engine?

[JrZook]

Fuel reg is situated after the fuel rail to pressurize it.

[Rossco]

ok so then this is what i have on the back of the fuel rail. there's no barb on it to attach the fuel feed hose.

[JrZook]

Zoom out a bit on the pic so the whole intake can be seen. That does look like your fuel regulator or a fuel pulse dampener. The reg screws into the fuel rail and should have a small port on it for vacuum and another larger port for the fuel return

[royce]

there is a banjo fitting screws on there between those 2 washers to feed fuel in, the regulator is at the front, then the line returns back and under the manifold to a barb for a hose

That bit thing will spin off from there easy

[Rossco]

thanks guys, so I'm missing the part which has a barb on it to feed fuel into the engine? I though there was something missing from there.

[Rossco]

thanks to everyone that helped me. missing that one part threw me but I got it from the wreckers this arvo and everythings hooked up now.