[azloki]

ok people, its stupid question time again

i am replacing the jets in my 1.3l sierra, standard asian carby, and i have no idea where they are or how to get to them, lol..

any info is appreciated, pics are good too

[atari4x4]

why are you replacing them, are you fitting larger ones?

[azloki]

yup

[atari4x4]

viewtopic.php?f=5&t=29725&p=540556&hilit=sierra+carby+rebuild#p540556

http://www.youtube.com/watch?feature=pl ... mJHc3YjwPQ

they're in there somewhere

[azloki]

rofl, that is my thread, lucky im getting a memory test done soon, lol...

[azloki]

memory test? fail, patience test is a bigger" fail, using the search feature on this site? massive fail..

so now ive got the jets in and once warm it runs sweet and can definitely feel the difference, now its a matter of curiosity and needing to get the thing starting a bit better when cold, so obviously i need to make some adjustments, im just not sure what the 2 screws on the carby adjust and which one i should adjust for the cold start ?

[zukmeista]

Those two screws won't help you. The one at the base of the carby adjusts the idle mixture, the other one adjusts hot idle speed.

[azloki]

what about the one under the throttle cable?

[zukmeista]

azloki wrote:

what about the one under the throttle cable?

That is "the other one"

[Scrawny]

What jets did you put in it? You may want to drop back down to a close-to-standard size jet for primary and a bigger for secondary. Otherwise play with the choke and make sure that's adjusted right and working properly.

[azloki]

on one of the carbys i have it has 3 screws, and the one under the throttle cable i thought was the choke adjustment one? but in saying that how exactly do u adjust the choke?

the one that i have on the car now only has 2 screws..

[zukmeista]

Sorry I wouldn't know as mine has a manual choke.

[azloki]

ok, got it all together and so on now i have a ferral flat spot when i try to take off, im thinking it maybe not getting enough fuel which i can fix by putting an electric fuel pump on which i was going to do anyway???