auszookers.com • View topic - 98-03 grand vitara steel 3rd member

Board index » Shift It And Find It » I Want it I Want it I want it

98-03 grand vitara steel 3rd member

Page 1 of 1

[ 23 posts ]

Print view

Previous topic | Next topic

Author

Message

willo

az supporter

Joined: Tue Jun 14, 2011 1:05 pm
Posts: 178
Location: Tom Price W.A.

Posted: Tue Sep 04, 2012 10:16 pm

Hi all I know this is a LOOOOONG shot but I am after a steel 3rd member from a 98-03 grand vitara to put on a Anvil diff housing .

Cheers
Willo

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Wed Sep 05, 2012 5:30 pm

A sierra 3rd can be made to fit.

willo

az supporter

Joined: Tue Jun 14, 2011 1:05 pm
Posts: 178
Location: Tom Price W.A.

Posted: Wed Sep 05, 2012 5:33 pm

Built4thrashing wrote:

A sierra 3rd can be made to fit.

??? Pleeeeaze Expplaain

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Wed Sep 05, 2012 7:08 pm

Sierra 3rd bolts in and lines up properly.
But the oil reserve on the bottom fouls on the Vits front cross member.
Some creative manufacturing is needed,
depending on your set up

Right cv won't go thru the Sierras carrier,
so vits carrier is needed.
But you would just use the Sierra steel 3rd, with Vits internal bits.
I was going to put one in my vit, but was unable to do the work needed.

Research it more, as my memory could be faded

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

willo

az supporter

Joined: Tue Jun 14, 2011 1:05 pm
Posts: 178
Location: Tom Price W.A.

Posted: Thu Sep 06, 2012 4:41 pm

cool thanks I will look into it

thesupervisor

Joined: Sat Jul 30, 2011 12:14 am
Posts: 193
Location: perth

Posted: Sat Sep 08, 2012 1:02 am

I have one $1000 posted in aus

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Sat Sep 08, 2012 1:25 am

sounds like my cup holders :lol:

_________________
You're just hating because you don't understand

thesupervisor

Joined: Sat Jul 30, 2011 12:14 am
Posts: 193
Location: perth

Posted: Sat Sep 08, 2012 10:45 am

Well I had to pay 800 to suzistore for one that needed full rebuild and no brackets so I think its a bargin

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Sat Sep 08, 2012 10:50 am

damn, i've been selling them WAY to cheap then.

_________________
You're just hating because you don't understand

Joe

I live here!

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Posted: Sat Sep 08, 2012 11:15 am

They fetch crazy prices over here for some reason

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

willo

az supporter

Joined: Tue Jun 14, 2011 1:05 pm
Posts: 178
Location: Tom Price W.A.

Posted: Sun Sep 09, 2012 12:21 am

Crazy is not the word I would use

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Sun Sep 09, 2012 11:49 am

Can buy complete wrecks for $2k so $1000 for a steel diff is a bit exy. Be cheaper to buy a steel anvil diff housing.

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sun Sep 09, 2012 11:59 am

Built4thrashing wrote:

Can buy complete wrecks for $2k so $1000 for a steel diff is a bit exy. Be cheaper to buy a steel anvil diff housing.

True, but you'll still need a steel 3rd.

_________________
2013 GV
1998 SV420 ute

Joe

I live here!

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Posted: Sun Sep 09, 2012 12:02 pm

Willo already has an anvil he just needs the 3rd member

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

thesupervisor

Joined: Sat Jul 30, 2011 12:14 am
Posts: 193
Location: perth

Posted: Mon Sep 10, 2012 12:22 am

well it will be cheaper if you come pick it up
tom price is not that far haha
pity i dont work at parabadoo anymore

willo

az supporter

Joined: Tue Jun 14, 2011 1:05 pm
Posts: 178
Location: Tom Price W.A.

Posted: Tue Sep 11, 2012 9:21 pm

I will say no thanks I am following a long Suzuki tradition and being a tight ass
(there needs to be a smiles that laughs like Sheldon Cooper) huhu hu

willo

az supporter

Joined: Tue Jun 14, 2011 1:05 pm
Posts: 178
Location: Tom Price W.A.

Posted: Wed Sep 12, 2012 2:04 pm

Well looks like I got one $500 Delivered from Queensland

Joe

I live here!

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Posted: Wed Sep 12, 2012 2:23 pm

Nice that's what i payed for the one in the white vit, did ya get it off someone on here or a wreckers?

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

willo

az supporter

Joined: Tue Jun 14, 2011 1:05 pm
Posts: 178
Location: Tom Price W.A.

Posted: Wed Sep 12, 2012 3:36 pm

A wrecker $400 +$100 delivery

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Wed Sep 12, 2012 5:31 pm

willo wrote:

A wrecker $400 +$100 delivery

Where from?

Vits93

az supporter

Joined: Mon Jul 05, 2010 11:42 am
Posts: 233
Location: Nowra NSW

Posted: Wed Sep 12, 2012 5:42 pm

have you tried http://www.suzukiwreckers.com.au/ got mine for $200 + postage

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Wed Sep 12, 2012 5:43 pm

Vits93 wrote:

have you tried http://www.suzukiwreckers.com.au/ got mine for $200 + postage

bargain

_________________
You're just hating because you don't understand

Vits93

az supporter

Joined: Mon Jul 05, 2010 11:42 am
Posts: 233
Location: Nowra NSW

Posted: Wed Sep 12, 2012 6:16 pm

atari4x4 wrote:

Vits93 wrote:

have you tried http://www.suzukiwreckers.com.au/ got mine for $200 + postage

bargain

I would recommend these guys to anyone, got a mate at work who's doing a gti conversion on his clubman and they were more than happy to help out with info and worked out what he needed, also think he got a pretty good price too.

Page 1 of 1

[ 23 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum