[atari4x4]

viewtopic.php?f=5&t=23917&p=423302&hilit=fuel+pressure+psi+vitara#p423302



[quote="fordem"] The G16B in the 1.6 GV is 29.8~37 psi at idle, 35/6~42.7 psi with fuel pump operating and engine stopped. [/quote]

[Bruce]

Noob question.
Can everyone see this area or just a few of the special people :-)

[shep]

[quote="Bruce"]Noob question.
Can everyone see this area or just a few of the special people :-)[/quote]

I dunno why people don't use it, ya ask a question and grimbo gets ya the answer.


I need 43 +/- 5psi so it should be in the right range. Thanks grimtari

[shandy92]

Guys im trying to a find the thread with all the vitara gearing options in it, i have found a set of vitara 5.62 diff ratios for sale over in the USA and thought i might post it in the thread so maybe someone here can buy them. i tried searching for it for ages and couldnt find the thread, if i remember correctly it has a few pages in it, not just a few posts.

here is the add: http://www.zukikrawlers.com/showthread.php?t=48636

cheers
Mitch

[atari4x4]

this is the only one i know of? :? viewtopic.php?f=17&t=6614&hilit=diff+ratio

[shandy92]

atari4x4 wrote:
> this is the only one i know of? :? viewtopic.php?f=17&t=6614&hilit=diff+ratio

yeah i saw that, im pretty sure there is another one somewhere. i couldnt find it myself, so thats why i asked. thanks anyway

[Pubic]

Excuse my lack of search ability, but are there any threads on the new shapeGV's with pros and cons etc?

Im looking at ridding myself of My BF MKII XR6 in exchange of a new type GV and want to know what models have what issues etc..

Thanks for your help in advance people

[shep]

[quote="Pubic"]Excuse my lack of search ability, but are there any threads on the new shapeGV's with pros and cons etc?

Im looking at ridding myself of My BF MKII XR6 in exchange of a new type GV and want to know what models have what issues etc..

Thanks for your help in advance people[/quote]

I don't think so, well exept for threads with reasons why the diesels suck.

[Pubic]

Well then, I may just have to start one!

I have been looking through a few of the build threads and there are a couple I like.

Just want to firm up what issues are evident in the first of the new shape compared to the 07 models on wards.

Thanks Shep

[shep]

Does anyone remember a thread about what degreaser to use in a parts washer?

[shandy92]

[quote="shep"]Does anyone remember a thread about what degreaser to use in a parts washer?[/quote]
kero :D

[shep]

Why does the quote button not work in this thread?

I can't use a solvent degreaser in my parts washer so kero is no good

[Joe]

[quote="shep"]Why does the quote button not work in this thread?

I can't use a solvent degreaser in my parts washer so kero is no good[/quote]

Works for me

[Joe]

No it doesn't

[Joe]

I use this stuff Shep

http://www.machineryhouse.com.au/Parts- ... ccessories

[ninjamoses]

Any one know of any posts or photos regarding lifting up rear wheel carriers?
Cut and welded the one on the SV, but just want to see how others have tackled it on hard top vits/GVs.

With the 235/85 on the back it sits hard on the rear bumper, so really need to raise it 2 - 3cm to give it enough clearance. I could maybe get 1cm by redrilling the holes in the bracket, but that isn't going to be enough.

Tried searching but didn't have much luck.

[DarkHorse]

FatZook did this for me a while back:

***Not letting me post [IMG] codes... WTF?***
First post on this page anyway: viewtopic.php?f=4&t=11477&start=300

Cut the flat mounting sections off and re-welded as high as it could with the existing steel. If you needed more it'd be a simple matter of some 25mm flat bar to replace.

[zukenutter]

ninjamoses wrote:

Any one know of any posts or photos regarding lifting up rear wheel carriers?
Cut and welded the one on the SV, but just want to see how others have tackled it on hard top vits/GVs.

Here's how I did mine (Jimny). Diagonal cut moved it up and out in one step.

http://auszookers.com/forum/viewtopic.php?f=4&t=16751&p=670877#p670877

[shep]

Is there such a thing as a sierra rear transfer flange that doesn't have the handbrake stuff attached. Ie a rear flange with 8mm bolt holes to fit a 4wd light transfer

[shep]

shep wrote:

Is there such a thing as a NT sierra rear transfer flange that doesn't have the handbrake stuff attached. Ie a rear flange with 8mm bolt holes to fit a 4wd light transfer

[matty_wall]

shep wrote:

Is there such a thing as a sierra rear transfer flange that doesn't have the handbrake stuff attached. Ie a rear flange with 8mm bolt holes to fit a 4wd light transfer

Pretty sure i have one of those.. Got it off Bluesuzys WT LWB.

[ozzycouch]

Hi Guys, Can someone point me in the direction of some pictures of bar work around the fuel filler on a SWB Vitara (91 Shape).
Looking to go between the slider and rear bar... ?

[fully sick coily]

does anybody know the link to th airfilter/airbox thread?

[shep]

Does anybody know where the tech articles have gone? Need to find the trailer plug diagram

[Fatzook]

http://www.britaxae.com.au/am/info_pages/britax-trailer-connector-wiring-diagrams.html

[schmiffee]

Hi,

New here so go easy :)

Just picked up my first 4wd on Friday (2005 GV - Manual 2.5) and have been looking around and searching pretty prolifically. Just wondering if there is a thread on problems these things can/do have? I will post a thread on my car and hopeful future upgrades in the next coupla days - any suggestions as to which thread to post this in as I will likely have many questions...

[DarkHorse]

This isn't overly helpful, but in the spirit of Grimbo...

Click on the 'Rigs of Auszookers' section. Scan down the list for threads about GVs. Any thread over a couple of pages will probably give you a pretty good idea of what they are like to live with.

...and welcome! Nice looking GV.

[GeckoXL7]

Is there a thread on rear brake shoe replacements?

Adjuster and small spring fell off. Just need to know where everything goes. Suzuki Manual is useless.

If not i may have to work it out and make a new thread up.. Got the other wheel as a reference (Just hate springs!)

[schmiffee]

I have had a look but can't find anything substantial/technical (most opinionative). Is there a thread on here regarding wheel spacers? I am intrigued at these and whether they are worthwhile or not (pro's vs con's)...

[Gwagensteve]

Worthwhile for what purpose?


Steve.