auszookers.com • View topic - [SYD] wrecking LWB vitara! GONE TOMORROW

Board index » Shift It And Find It » Getting rid of stuff

[SYD] wrecking LWB vitara! GONE TOMORROW

Page 1 of 1

[ 30 posts ]

Print view

Previous topic | Next topic

Author

Message

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Sat Jan 26, 2013 2:39 am

wrecking my 98' lwb vitara

ask for prices on stuff.
make offers

g16B engine, loom, ecu, dash ect. whatever bits you want
has a small leak 318xxx kms but ive driven reliably daily for 2 years.
come and see it running in car, see it for what it is
$500pending payment

manual gearbox
average condition
$100 pending payment

2 x transfer cases
$120 each

simple rear bar, fits 32' tyre
$50

front dobinsons lift springs
$120

near new rear windsheild
$100

15x7 dynamic steel wheels -13 offset with 30x9.5 muds
$400

fairly new radiator
$80

tjm alloy bullbar with mounts
$350

3mm custom steel bashplate. trail tested!
$150

more to come

complete factory fitted air con setup (not cold)
$150ono sold

towbar
$100

rear swaybar (pedders i think)
$50

4x 215/75r15 nankang wide conqueror AT (80%+ tread)
$300ono

front brake calipers, freshly machined rotors, new pads
some seals replaced and included will be the rest of the seal kit to rebuild the calipers.
$300ono

complete power steering setup
$400ono

Last edited by larry on Wed Feb 13, 2013 9:07 pm, edited 7 times in total.

DarkHorse

az supporter

Joined: Wed Apr 14, 2010 11:30 pm
Posts: 5413
Vehicle: 08 SV650

Posted: Sat Jan 26, 2013 11:04 am

Hahaha - that rear glass is getting around!

Why you wrecking - buy that 2L behind it?

Zuzukie

Joined: Tue Mar 27, 2012 3:13 pm
Posts: 194
Vehicle: 82 1ltr, 93 1.3 with 6.5's

Posted: Sat Jan 26, 2013 7:09 pm

Price on
Starter motor
Both doors
Exhaust and manifold/extractors
Front left quarter panel
Interested in rims and tyres, springs, rear bar

stocker

Joined: Wed Dec 08, 2010 7:16 am
Posts: 941
Location: Shidoni!

Posted: Sat Jan 26, 2013 8:44 pm

You selling the winch?

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Sat Jan 26, 2013 9:30 pm

got an alloy 26 spline front 5.12 in that jigger or one kicking around?

_________________
You're just hating because you don't understand

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Sat Jan 26, 2013 10:36 pm

Willing to send motor and box to WA?

_________________
Tell my arse, he actually gives a crap!

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Sun Jan 27, 2013 3:26 pm

yeah i bought the 2L

Zuzukie wrote:

Price on
Starter motor selling with the motor
Both doors $100
Exhaust and manifold/extractors aftermarket extractors into 2inch pipe with cat $150 (im keeping the muffler)
Front left quarter panel $40
Interested in rims and tyres, springs, rear bar

keeping winch, keeping diff gears
extractors:

monley wrote:

Willing to send motor and box to WA?

not at this stage, if noone closer wants it ill pm you

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Wed Jan 30, 2013 7:29 pm

Bump~

cooperrat

Joined: Wed Apr 13, 2011 9:22 am
Posts: 34
Location: sydney

Posted: Thu Jan 31, 2013 10:20 am

Hi,any idea if the rear bar will fit a SWB fit,,cheers

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Thu Jan 31, 2013 12:01 pm

cooperrat wrote:

Hi,any idea if the rear bar will fit a SWB fit,,cheers

pretty sure swb chassis is different at the rear, would fit with some modification

jimnynutter

Joined: Mon Jul 30, 2012 8:49 pm
Posts: 518
Location: Canberra ACT
Vehicle: Lwb vit, 31's big white fridge

Posted: Sun Feb 03, 2013 12:15 pm

Will the axle housing match a 93 LWB?

My wheel and drum came off at 40kph and has bent the lower shock mounts
How much for

Axle housing.
Axles,drums and backing plates and brake setup.

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Sun Feb 03, 2013 6:27 pm

jimnynutter wrote:

Will the axle housing match a 93 LWB?

My wheel and drum came off at 40kph and has bent the lower shock mounts
How much for

Axle housing.
Axles,drums and backing plates and brake setup.

hey mate,

thats a shame about the little accident, howd that happen?

hows $350 sound for the rear axle (minus diff centre)

has had the left wheel bearing and seals replaced recently. - $60
brakes have been reconditioned <3000km. new shoes and wheel cylinders -$100ish
also from memory i think they are the bigger 10" drums (will confirm) so will be a bonus brake upgrade.
axles in good condition

let me know if you want it, i can have it ready for pickup by late tomorrow arvo

Larry

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Tue Feb 05, 2013 9:26 pm

Bumpy

got_bar_work

Joined: Sat May 15, 2010 8:30 pm
Posts: 2214
Location: Brisbane
Vehicle: SQ625

Posted: Thu Feb 07, 2013 6:45 pm

Got a pic of the rear sway bar

jimnynutter

Joined: Mon Jul 30, 2012 8:49 pm
Posts: 518
Location: Canberra ACT
Vehicle: Lwb vit, 31's big white fridge

Posted: Thu Feb 07, 2013 8:28 pm

Can't get the axle housing off you sorry dude.
Bank says :no:

can't afford the fuel up and back and the bits too. :cry:

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Thu Feb 07, 2013 8:40 pm

jimnynutter wrote:

Can't get the axle housing off you sorry dude.
Bank says :no:

can't afford the fuel up and back and the bits too. :cry:

man ive already pulled the axle and got it cleaned up ready to go. sneaky ranger came to look at it today as its now on bricks and i assume a complaints been made. would be great to be able to push it onto the front lawn..

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Thu Feb 07, 2013 8:50 pm

got_bar_work wrote:

Got a pic of the rear sway bar

viewtopic.php?f=4&t=16998&start=30

jimnynutter

Joined: Mon Jul 30, 2012 8:49 pm
Posts: 518
Location: Canberra ACT
Vehicle: Lwb vit, 31's big white fridge

Posted: Fri Feb 08, 2013 9:27 am

Ill be up Saturday morning. Pm me your address and ill be there before lunch.

jimnynutter

Joined: Mon Jul 30, 2012 8:49 pm
Posts: 518
Location: Canberra ACT
Vehicle: Lwb vit, 31's big white fridge

Posted: Fri Feb 08, 2013 9:55 pm

Got loaned some money's from the parents.
Woohoo.
Now I can pay you fairly.

jimnynutter

Joined: Mon Jul 30, 2012 8:49 pm
Posts: 518
Location: Canberra ACT
Vehicle: Lwb vit, 31's big white fridge

Posted: Sat Feb 09, 2013 10:41 pm

Thanks heaps Larry!!!! :youdaman:

Well worth the drive to Sydney.

cbzook

az supporter

Joined: Sat Sep 13, 2008 11:30 pm
Posts: 272
Location: Port Macquarie
Vehicle: 6.5s, gti, 31 extremes

Posted: Sun Feb 10, 2013 6:02 am

How much for fuel pump & unit?

Blkfxx

az supporter

Joined: Sat Feb 04, 2012 7:11 pm
Posts: 1105
Location: Oberon, NSW
Vehicle: Drover pickup turk

Posted: Sun Feb 10, 2013 6:41 pm

Spindles?

_________________

Quote:

I like the tuna here

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Sun Feb 10, 2013 9:07 pm

jimnynutter wrote:

Thanks heaps Larry!!!! :youdaman:

Well worth the drive to Sydney.

no worries mate, cheers

cbzook wrote:

How much for fuel pump & unit?

pretty sure thats mounted inside the fuel tank, which is sold. sorry

Blkfxx wrote:

Spindles?

sold

Ethann

az supporter

Joined: Wed Nov 09, 2011 9:38 pm
Posts: 454
Location: Clarence Town
Vehicle: '78 lj80

Posted: Sun Feb 10, 2013 9:13 pm

Price on

Bonnet and the back door handle?
Thanks.

_________________
ThisIsYourLife&ItsEnding1MinuteAtATime.

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Mon Feb 11, 2013 9:58 pm

Ethann wrote:

Price on

Bonnet and the back door handle?
Thanks.

pm sent

oohsam

Joined: Mon Apr 30, 2012 7:12 pm
Posts: 489
Location: south east melbourne
Vehicle: 96 vit hardtop

Posted: Tue Feb 12, 2013 8:45 am

U got the Front Diff Carrier? Need just the Carrier (But hapy to pay u for the whole diff but if you can just send that down melbourne way.

Cheers

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Wed Feb 13, 2013 8:49 pm

oohsam wrote:

U got the Front Diff Carrier? Need just the Carrier (But hapy to pay u for the whole diff but if you can just send that down melbourne way.

Cheers

i have one out of a gv front steel diff?

DZ00KI

Joined: Tue Dec 29, 2009 10:30 pm
Posts: 14
Location: woop woop

Posted: Wed Feb 13, 2013 10:52 pm

How much for the grill if available ???

got_bar_work

Joined: Sat May 15, 2010 8:30 pm
Posts: 2214
Location: Brisbane
Vehicle: SQ625

Posted: Thu Feb 14, 2013 4:18 am

How much for the lh front guard and chassis

larry

Joined: Wed Sep 08, 2010 3:15 am
Posts: 657
Location: penrith, NSW

Posted: Thu Feb 14, 2013 9:36 am

PMs sent

Page 1 of 1

[ 30 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 63 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum