[zukenutter]

4WD light on dash flashing when 4WD is engaged on a Jimny. Anybody have any ideas. It's not a loose connection flicker, more like a regular, constant flash.

[joeblow]

is the filter on the actuator bloked, and is the vac line still attached?

[zukenutter]

It's another Jimny owner who's yet to join AusZookers, so at the moment I only have basic info.

His 4WD activation is working fine apparently. My first suggestion was loose connection, but he reckons it's a regular warning type flash

[Scrawny]

Small piece of black electrical tape across the dash usually fixes it

As Joe suggested, look for damaged/loose vacuum lines or blocked actuator

[shep]

ScrawnC wrote:

Small piece of black electrical tape across the dash usually fixes it

thats how i fixed it in my bitsamissen only problem is that now low range
is a bit hit and miss.

[zukenutter]

joeblow wrote:

is the filter on the actuator bloked, and is the vac line still attached?

i'll pass this on and see what he says