[thorno]

hi all. chasing a lj50 speedo needle from the dash cluster. HELP!
thx

[thorno]

does any body know if anything else will fit. perhaps something from a later model zuk? ,,, lj80, sierra?

[missmyljdaze]

How urgent do you need it?

The LJ50 speedo cluster from my old "frankenzook" is under a collapsed shed, on a farm a few clicks north of Bindoon.

The speedo was complete and undamaged last time I checked, but it might be a while before I can get back there.


stephen

[thorno]

thx i have two dash clusters both have broken needles. let me know if you get to check it out sometime

[missmyljdaze]

Looks like I should be heading back to the farm next saturday arvo,
Will do a search and rescue from under the shed while I am there, and possibly rescuing some oddball crossbreed rims at the same time.

If you have a ithingo phone I can send pics.

stephen

[thorno]

bump!!! also chasing a lj50 bonnet!

[tanshi]

thorno wrote:

also chasing a lj50 bonnet!

good luck!

Im looking at having some fiberglass ones made but they aren't cheap

[GraphicX]

i'll have a spare bonnet in the near future in fairly average condition, but in south australia :/

[greyghost]

they are so hard to get good ones. I'm straightening the rust free one here that has been in a big roll, and currently looks like a crumpled piece of tin-foil.

good luck though.

[henno]

I already have one in fairly average condition but I am convinced it is more rust than metal.

[thorno]

figured that, thought i would put it out there anyways, will a lj80 bonnet bolt straight up?, also anybody got a speedo needle out of the dash cluster?

[henno]

thorno wrote:

lj80 bonnet bolt straight up?

Nah. If you have one you should just give it to me.

[thorno]

i have a reasonable straight one slightly molested along the hinge end but a reasonable fix for someone in the know how, find me a 50ty one and i'll trade?