auszookers.com • View topic - Non-VVT Jimny diff ratios

Board index » Talking About Stuff » Suzuki Talk

Non-VVT Jimny diff ratios

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

Hoogz

Joined: Sun Apr 24, 2016 5:16 pm
Posts: 17
Vehicle: Suzuki Jimny

Posted: Thu Jul 14, 2016 8:43 pm

Evening all...

Just needed to confirm something... Did non VVT Jimnys (98-05) run 3.909:1 diff ratio?

I know VVT Jimny run 4.300:1 manual and 4.090:1 auto ;-)

Cheers

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Sat Jul 16, 2016 10:57 am

No, pre VVT are all 4.09 AFAIK.

Coil sierra is 3.9, but the front diff gears are different.

Steve.

pete_79

Joined: Wed Feb 06, 2013 8:24 pm
Posts: 1574
Vehicle: 91 Tin Top

Posted: Sat Jul 16, 2016 4:17 pm

Sure about that one Steve?

I know of one coily that 'accidentally' had Jimny front gears fitted in it.

It drove quite a few k's with different ratios front to back. Luckily the track was very greasy and didn't explode the transfer, but it jittered around everywhere and took some effort to get it out of 4wd at the end of the day.

jiminycricket

Joined: Fri Feb 03, 2017 10:58 pm
Posts: 5
Vehicle: Jimny 98

Posted: Wed Feb 15, 2017 10:20 pm

ive just pulled the rear diff in my 98 jimny to fit a spartan autolocker and found:

pinion 11 tooth, crown 45 tooth
that is, 4.09 ratio.

ive only just bought this car, so i dont know if its all original, but maybe it helps someone.

Page 1 of 1

[ 4 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum