auszookers.com • View topic - Baleno engine lift points

Board index » Talking About Stuff » N00b Talk

Baleno engine lift points

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

davemcgrath

Joined: Sat Oct 30, 2010 8:14 am
Posts: 81
Location: Geelong
Vehicle: 1995 Suzuki Sierra SJ70

Posted: Fri Jun 23, 2017 12:59 pm

Another noob type question here.

Where is the second Baleno engine lift point?
I can only see 1, highlighted in purple below.
I actually want to remove the engine minus the transmission if possible.
The FSM only explains how to remove them both together.
Assuming I just undo the transmission to engine connections and push them apart as I hoist out the engine.

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13001
Location: Melbourne

Posted: Fri Jun 23, 2017 1:33 pm

I just run a strap around the back of the head/ thermostat housing. It's not a heavy motor.

MrRocky

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Posted: Fri Jun 23, 2017 3:44 pm

I just double up a tiedown strap through the exhaust and inlet manifolds

_________________
...

davemcgrath

Joined: Sat Oct 30, 2010 8:14 am
Posts: 81
Location: Geelong
Vehicle: 1995 Suzuki Sierra SJ70

Posted: Fri Jun 23, 2017 5:31 pm

I decided to remove one of the lift points from the sierra 1.3 block and then attached it to the inlet manifold on the Baleno.
Seemed to hold pretty firm. Got it out and onto a pallet now!

Page 1 of 1

[ 4 posts ]

Board index » Talking About Stuff » N00b Talk

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum