| Author |
Message |
Ryno78
Joined: Tue Apr 18, 2017 2:06 pm Posts: 20
Vehicle: 84 Suzuki Sierra
|
 Posted: Thu Jan 14, 2021 8:58 am |
|
|
G'day,
Have an 83 Sierra. When accelerating/driving there is a deadset annoying squeak coming from under the car.
Appears to be close to directly under the front seats or close enough.
Put clutch in and roll and the noise goes away?
Any suggestions or ideas?
Cheers,
Geoff
|
|
|
|
 |
sideways

az supporter
Joined: Fri Oct 29, 2010 1:53 pm Posts: 5935 Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.
|
 Posted: Thu Jan 14, 2021 9:11 am |
|
|
|
 |
MrRocky
Joined: Thu Dec 17, 2009 10:30 pm Posts: 4731 Location: perth
|
 Posted: Thu Jan 14, 2021 9:17 am |
|
|
Thrust bearing Gbox out and replace Prob worth doing the rear main, gbox seal and clutch while your at it on an 83 model
_________________ ...
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13000 Location: Melbourne
|
 Posted: Thu Jan 14, 2021 9:19 am |
|
|
That’s consistent with a uni that’s dry and close to failure.
|
|
|
|
 |
sideways

az supporter
Joined: Fri Oct 29, 2010 1:53 pm Posts: 5935 Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.
|
 Posted: Thu Jan 14, 2021 9:24 am |
|
MrRocky wrote: Thrust bearing Gbox out and replace Prob worth doing the rear main, gbox seal and clutch while your at it on an 83 model Stuffed thrust bearing would make noise when the clutch is pushed in, the opposite to the problem OP is having.
|
|
|
|
 |
Ryno78
Joined: Tue Apr 18, 2017 2:06 pm Posts: 20
Vehicle: 84 Suzuki Sierra
|
 Posted: Thu Jan 14, 2021 10:51 am |
|
Thanks for that. I'll get the Uni's looked at. Thrust bearing also needs replacing unfortunately, a bought a lot of work 
|
|
|
|
 |
MrRocky
Joined: Thu Dec 17, 2009 10:30 pm Posts: 4731 Location: perth
|
 Posted: Thu Jan 14, 2021 1:52 pm |
|
|
Never had a uni squeak normally metallic clink for me means too much play
_________________ ...
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13000 Location: Melbourne
|
 Posted: Thu Jan 14, 2021 5:42 pm |
|
|
Definitely heard them squeak... normally not that long before they let go
|
|
|
|
 |
rexhunta

az supporter
Joined: Sun Jan 26, 2014 9:03 am Posts: 212 Location: Leschenault, WA.
Vehicle: 2020 Vitara Turbo
|
 Posted: Fri Jan 15, 2021 6:32 am |
|
|
I had squeaky unis on the jack shaft. Sounds exactly like the problem he's having.
|
|
|
|
 |
sideways

az supporter
Joined: Fri Oct 29, 2010 1:53 pm Posts: 5935 Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.
|
 Posted: Fri Jan 15, 2021 9:35 am |
|
|
Yeah I've had them squeak like OP is saying. Both times just 1/4 of the uni was dry and there was no play.
|
|
|
|
 |
|