It is currently Thu Apr 23, 2026 2:11 am
Board index » Talking About Stuff » I made it and fabrication



Post new topic Reply to topic  [ 11 posts ] 
Author Message

Offline
az supporter
az supporter
User avatar

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Post Posted: Sat Jan 03, 2009 1:00 am 
Reply with quote Top  
Was bored this arvo so I went out to tinker with my zook I had a new cooler/warmer in my gararge that has been sittin there for about a year I tryed it in behind the seats and fitt good except for the drop in the tunnel so I decided to make a cradle to sit it in.

this is the cooler

Image

I measured the cooler and cut some alloy angel up to suit

Image

then I sat it all together to see if it fit

Image

Image

it fit well so then I drilled and pop rivet it together

Image

Image

then I cut some bits of the alloy to go on the corners

Image

my cooler has rounded corners so I had the pop rivets facing in for looks

Image

next I needed some legs to support it where the tunnel drops I bent a bit of alloy up and pop riveted it into place

Image

Image

I tryed it in the zook fit good the gave it a lick of paint

Image

then once dry I screwed it down into place and fitted the cooler

Image

Image

Image

all up took about a hour and a half to make nice and easy
hope this helps some one

cheers jimbo

 Profile YIM  

Offline
User avatar

Joined: Sat Jun 16, 2007 11:30 pm
Posts: 227

Post Posted: Sat Jan 03, 2009 2:10 am 
Reply with quote Top  
ah nice work. that looks neat. hows it feel getting your drinks in and out?

 Profile  

Offline
User avatar

Joined: Fri Aug 25, 2006 11:30 pm
Posts: 278
Location: bundamba

Post Posted: Sat Jan 03, 2009 2:24 am 
Reply with quote Top  
nice job jimbo. things you do when boredom sets in. is it run of 12v cigarette lighter or 240v power.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Post Posted: Sat Jan 03, 2009 2:36 am 
Reply with quote Top  
its not to bad to reach and yes its a 12v cig liter socket

 Profile YIM  

Offline

Joined: Thu Sep 25, 2008 11:30 pm
Posts: 45
Location: Melbourne

Post Posted: Sun Jan 04, 2009 2:38 am 
Reply with quote Top  
Nice job. Looks like I started something. Lol!

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 490
Location: Rosevears Tas

Post Posted: Mon Jan 05, 2009 5:16 pm 
Reply with quote Top  
These are bloody handy things, Had one mounted in my cruiser for over 2 years. Gets used to keep the frothys cold sometimes and others to heat or keep my pies warm or heat the bottle for the youngn. Top work

 Profile  

Offline

Joined: Mon May 26, 2008 11:30 pm
Posts: 390

Post Posted: Mon Jan 05, 2009 8:48 pm 
Reply with quote Top  
TASSIETOYUKI wrote:
Gets used to keep the frothys cold sometimes and others to heat or keep my pies warm or heat the bottle for the youngn. Top work


Go that bit extra and go buy a 12v oven from Dick Smiths, so you can have a cold beer and a hot pie all at once whilst on the move. I have a similiar sized Waeco and 12v Oven both sitting behind my seat in my work van and couldn't do without them now.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 490
Location: Rosevears Tas

Post Posted: Tue Jan 06, 2009 1:33 pm 
Reply with quote Top  
hmm.. I have actually had one of the 12v ovens for nearly 7 years. Used to use it extensivly when 4wd in winter, dont use it much since putting the fridge/warmer in. To tell you the truth I dont drink that much anymore, much easier not to if you dont have any coldies either :wink:

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Aug 30, 2009 11:30 pm
Posts: 2659
Location: hobart tasmania

Post Posted: Tue Oct 20, 2009 11:47 pm 
Reply with quote Top  
i have a the same size in the waeco cost me 100 buck and i want to try and fit it between seat but i cant do that with out a bit of cutting on one of the seats does any one ave any suggestions


Last edited by BUZOOKA on Thu Jan 14, 2010 1:50 am, edited 1 time in total.
 Profile  

Offline

Joined: Sat Nov 14, 2009 10:30 pm
Posts: 246
Location: glasshouse mtns
Vehicle: 1995 soft top vitara

Post Posted: Thu Nov 19, 2009 3:19 am 
Reply with quote Top  
how well does the cooler work? i have the exact same one sitting in the my zook, i put it in there last week but havent had the chance to give it a run.

_________________
turbo vitara, fark yeah.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Post Posted: Sat Jan 09, 2010 2:46 am 
Reply with quote Top  
zook_ute wrote:
how well does the cooler work? i have the exact same one sitting in the my zook, i put it in there last week but havent had the chance to give it a run.


there ok as long as what you put on there is already cold
its no longer in there as it dosent fit with the new seats

_________________
www.illawarrasuzuki4wdclub.webs.com

 Profile YIM  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours