auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

Axle seal front

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

mudzookacoatsy

Joined: Fri Jul 31, 2009 11:30 pm
Posts: 380
Location: ipswich

Posted: Tue Aug 09, 2011 7:45 am

Hey all just after some info. Wats the easiest way to take out and put back in ???

_________________
2''lift 31's twin locked & 6.5s

peteandliz

Joined: Mon Aug 01, 2011 2:51 pm
Posts: 163
Location: brisbane
Vehicle: 93 lwb vitara

Posted: Tue Aug 09, 2011 8:07 am

pay some one

nato78

az supporter

Joined: Fri Apr 09, 2010 11:30 pm
Posts: 1504
Location: Auckland, NZ
Vehicle: Yamaha scooter, 50cc

Posted: Tue Aug 09, 2011 8:13 am

I've just done mine, pretty easy job. Get yourself a workshop manual, makes it heaps easier. I'll post up how I did it when I get home from work.

bohuler

az supporter

Joined: Wed Nov 10, 2010 9:18 am
Posts: 1376
Location: Avonsleigh, Victoria

Posted: Tue Aug 09, 2011 8:19 am

It depends on the car. I have a sierra with free wheeling hubs and its very very easy to do a front axle seal. Infact, i will post up in the next few weeks a full front hub strip down and rebuild tech thread for those who are unsure. Its pretty easy tho

Just a few simple tools and a bit of taking your time and not loosing any bolts!
Dave

_________________
Life's short, fiddle with your willy while you can

mudzookacoatsy

Joined: Fri Jul 31, 2009 11:30 pm
Posts: 380
Location: ipswich

Posted: Tue Aug 09, 2011 8:23 am

I've everything apart just need to get seal out and back in

_________________
2''lift 31's twin locked & 6.5s

mnemonix

az supporter

Joined: Sun Aug 16, 2009 11:30 pm
Posts: 1409
Location: Newcastle NSW
Vehicle: '96 LWB trayback

Posted: Tue Aug 09, 2011 8:34 am

Big ass screw driver to pry it out. Don't scratch the sealing surface in the diff.
Whack a new one in with a soft face hammer. Use a large socket as a punch to drive it in square if need be.

_________________
Twin charged twin cam twin locked webwheeler

mudzookacoatsy

Joined: Fri Jul 31, 2009 11:30 pm
Posts: 380
Location: ipswich

Posted: Tue Aug 09, 2011 8:50 am

Thanks mate . With it leaking like that and getting on tha brake disc and pads that would make it pull right under braking cos of the oil on pad and disc. Hope I made sence

_________________
2''lift 31's twin locked & 6.5s

nato78

az supporter

Joined: Fri Apr 09, 2010 11:30 pm
Posts: 1504
Location: Auckland, NZ
Vehicle: Yamaha scooter, 50cc

Posted: Tue Aug 09, 2011 11:43 am

Sounds like you got it sorted, I did mine exactly the way mnemonix said.

Page 1 of 1

[ 8 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 289 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum