auszookers.com • View topic - Weeping Trans Drain Plug

Board index » Talking About Stuff » Suzuki Talk

Weeping Trans Drain Plug

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

JasonSelmes

Joined: Fri Oct 12, 2012 9:48 pm
Posts: 73
Vehicle: Suzuki Vitara JLX 1991

Posted: Fri Feb 22, 2013 3:06 pm

Hi Folks,

I have a weeping Trans drain bolt. I have tried the thread tape and it hasnt worked. Slowly dripping trans oil.

IS there anyway to counter the problems. Seems the transfer case and diffs have no issue but the trans just wont stop weeeping oil.

Any fixes?

Cheers

Systolic_Lotus

Joined: Wed Nov 23, 2011 1:51 am
Posts: 35
Location: Darwin

Posted: Fri Feb 22, 2013 3:59 pm

Has it got the seal on it still? I'd replace it with a new ?copper seal.

JasonSelmes

Joined: Fri Oct 12, 2012 9:48 pm
Posts: 73
Vehicle: Suzuki Vitara JLX 1991

Posted: Fri Feb 22, 2013 4:58 pm

Systolic_Lotus wrote:

Has it got the seal on it still? I'd replace it with a new ?copper seal.

Nah mate no seal. Can i get one for supercheap auto?

JasonSelmes

Joined: Fri Oct 12, 2012 9:48 pm
Posts: 73
Vehicle: Suzuki Vitara JLX 1991

Posted: Fri Feb 22, 2013 5:05 pm

Systolic_Lotus wrote:

Has it got the seal on it still? I'd replace it with a new ?copper seal.

I am also not sure if the 1991 vitara are supposed to have a seal because there is no taper for the seal to ride up against to hold it in place. hmmmm 8-O

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Fri Feb 22, 2013 5:14 pm

degrease & clean up the drain plug so it's spotless, run a small bead of oil friendly silicone around the flange & let it tack off so it's almost dry, then fit.

_________________
You're just hating because you don't understand

fordem

Joined: Mon Apr 19, 2010 11:30 pm
Posts: 2656
Location: Georgetown, Guyana
Vehicle: APK416, A6G415, A6N415

Posted: Sat Feb 23, 2013 2:25 am

If there's a flange there should be either a copper or plastic washer to seal it - if there is no flange, it will be tapered and thread seal should work.

mrw82

az supporter

Joined: Tue Jul 03, 2007 11:30 pm
Posts: 1350
Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre

Posted: Sat Feb 23, 2013 5:22 am

You only have to worry when it stops leaking.

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Sat Feb 23, 2013 6:43 am

Mine was weeping. Didn't bother fixing till fluid change was due.
I retapped mine and fitted a slightly bigger drain plug., but my thread was stuffed.
Changing pan could be a better solution.
Mine still weeps slightly, but hasn't shown any drop on stick,
or dripped on the skid pan yet.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

Page 1 of 1

[ 8 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 134 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum