| Author |
Message |
Mike57

az supporter
Joined: Fri Jul 22, 2011 11:09 am Posts: 1009 Location: Melbourne
Vehicle: Suzuki Jimny 2009
|
 Posted: Mon Dec 19, 2011 8:35 am |
|
I found out about one weakness in the Jimny the hard way. On the track between Dalhousie Springs and Hamilton Homestead in South Australia I heard a bad noise as we went through a muddy creek crossinbg. Got out to find this.
and this
Removed the rear shock and drove 150km to Oodnadatta. Ended up getting a free ride to Coober Peddy. ARB sent up a replacement shock and we were on the road the next day.
Lesson learnt is to make sure you use loctite on these bolts which have no spring washer on them. Looking at the Jimny bits web site much later I see they have a few solutions for this which involve drilling out the thread and fitting a long bolt with a nylock nut. Probably not a bad idea but mine are all threadlocked now.
|
|
|
|
 |
monley

az supporter
Joined: Wed Nov 24, 2010 7:58 am Posts: 11092 Location: Mandurah.W.A.
Vehicle: 84 LWB NT
|
 Posted: Mon Dec 19, 2011 8:46 am |
|
Mike57 wrote: I found out about one weakness in the Jimny the hard way.
 They have lot's more weaker things than a shock bolt coming off 
_________________ Tell my arse, he actually gives a crap!
|
|
|
|
 |
losfer

az supporter
Joined: Fri Mar 30, 2007 11:30 pm Posts: 977
|
 Posted: Mon Dec 19, 2011 8:49 am |
|
monkey wrote: Mike57 wrote: I found out about one weakness in the Jimny the hard way.  They have lot's more weaker things than a shock bolt coming off 
touche.
ive seen those bolts fall out, and snap off
|
|
|
|
 |
monley

az supporter
Joined: Wed Nov 24, 2010 7:58 am Posts: 11092 Location: Mandurah.W.A.
Vehicle: 84 LWB NT
|
 Posted: Mon Dec 19, 2011 8:51 am |
|
ybits.co.uk/shop/jimny/jimny-rear-shock-repositioners-/-spacers/prod_5.html
These will stop it from happening again  mine were always coming loose but once i got these no more issues  plus you get 35mm more down travel 
_________________ Tell my arse, he actually gives a crap!
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Mon Dec 19, 2011 8:53 am |
|
|
I had the same problem, as I mention a few threads down. I lost one, broke one and another one was loose today, all in a months driving.
I was advise not to locktite them in but to put a spring washer on instead.
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
Mike57

az supporter
Joined: Fri Jul 22, 2011 11:09 am Posts: 1009 Location: Melbourne
Vehicle: Suzuki Jimny 2009
|
 Posted: Mon Dec 19, 2011 9:07 am |
|
|
I now have some spare bolts but I think the Jimnybits solution is worth a look for the long term. From now on I will check these bolts regularly. Nothing else broke though and we were on some pretty rough roads. This was a shake down cruise for the Simpsonm crossing next year.
|
|
|
|
 |
Mike57

az supporter
Joined: Fri Jul 22, 2011 11:09 am Posts: 1009 Location: Melbourne
Vehicle: Suzuki Jimny 2009
|
 Posted: Mon Dec 19, 2011 9:13 am |
|
|
Zooky08, just read your post. I will keep an eye on them and think about a spring wahser then. Might need to carry and easyout also in case one snaps. It was pretty nerve racking driving without one shock over those roads for such a long distance.
|
|
|
|
 |
Total_Filth
Joined: Sun Nov 06, 2011 12:36 am Posts: 146 Location: Melbourne, VIC
Vehicle: 02 Suzuki Jimny
|
 Posted: Mon Dec 19, 2011 9:19 am |
|
|
How the heck are you going to cross the simmo in a jimny? Fuel Trailer!?
TF
|
|
|
|
 |
Mike57

az supporter
Joined: Fri Jul 22, 2011 11:09 am Posts: 1009 Location: Melbourne
Vehicle: Suzuki Jimny 2009
|
 Posted: Tue Dec 20, 2011 12:45 am |
|
|
No, many mates with bigger cars offering to carry a can each of fuel for me. Should be a good challenge.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Tue Dec 20, 2011 9:14 am |
|
losfer wrote: monkey wrote: Mike57 wrote: I found out about one weakness in the Jimny the hard way.  They have lot's more weaker things than a shock bolt coming off  touche. ive seen those bolts fall out, and snap off
Yep!!! 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
Sookie

az supporter
Joined: Sun Jul 01, 2012 8:22 pm Posts: 704
Vehicle: Sj51t
|
 Posted: Sun Sep 01, 2013 2:20 pm |
|
|
This happen to me yesterday same side on my rocklands trip Had to drive all way home today a shocker down Where can I get a new bolt??
|
|
|
|
 |
Bugsta
Joined: Fri Oct 30, 2009 10:30 pm Posts: 1754 Location: North Brisbane
|
 Posted: Sun Sep 01, 2013 2:34 pm |
|
|
Any Fastener place but they likely won't have the same head size, but it will get you out of trouble.
I have been trying to find an 'automotive' fastener supplier. I haven't looked hard.
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Sun Sep 01, 2013 3:36 pm |
|
|
Drill inside thread out and putt a bolt through with a nut.
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
Mike57

az supporter
Joined: Fri Jul 22, 2011 11:09 am Posts: 1009 Location: Melbourne
Vehicle: Suzuki Jimny 2009
|
 Posted: Mon Sep 02, 2013 4:46 pm |
|
|
Those bolts are only a few dollars each from any Suzuki dealer.
|
|
|
|
 |
|