auszookers.com • View topic - Coily Rear trailing arms

Board index » Shift It And Find It » I Want it I Want it I want it

Coily Rear trailing arms

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

Sr20DET-Coily

Joined: Mon May 21, 2012 6:36 pm
Posts: 11
Vehicle: 99 SJ80 Coily SR20DET

Posted: Sun Aug 12, 2012 6:54 pm

Hey guys I'm in desperate need of coily rear trailing arms, the more sets the better for my up coming Trials season.
Thanks
Rhys

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sun Aug 12, 2012 9:41 pm

Sr20DET-Coily wrote:

Hey guys I'm in desperate need of coily rear trailing arms, the more sets the better for my up coming Trials season.
Thanks
Rhys

Sucks you can't make better ones, or atleast laminate the OEM arms.

_________________
2013 GV
1998 SV420 ute

Sr20DET-Coily

Joined: Mon May 21, 2012 6:36 pm
Posts: 11
Vehicle: 99 SJ80 Coily SR20DET

Posted: Mon Aug 13, 2012 9:30 am

I've tried all sorts to over come but have ended up in the same predicament everytime, which is kicked out of class.
Next thing to try is flog out middle bush and put in new nolathane bushes into front and back, and make sure my top link has no forward or backward movement, this should hopefully make it behave more like a four link

You do not have the required permissions to view the files attached to this post.

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon Aug 13, 2012 12:28 pm

Could you run a uniball/ jonny joint arrangement? There may be one that fits, if I recall, the ID of the bush sleeve on the jimny/ coily arms is about 51mm, so a 2" joint should work. You may need a couple circlip grooves machined in to retain it, but the arm itself will be essentially un-altered.

http://www.polyperformance.com/shop/Uniballs-p-202.html

http://www.polyperformance.com/shop/Johnny-Joints-p-16765.html

_________________
2013 GV
1998 SV420 ute

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Mon Aug 13, 2012 1:30 pm

I'm pretty sure pootrol rear trailing arm bushes will fit.

Sr20DET-Coily

Joined: Mon May 21, 2012 6:36 pm
Posts: 11
Vehicle: 99 SJ80 Coily SR20DET

Posted: Mon Aug 13, 2012 2:09 pm

sweet as will have a look, i've got two arms so far but will need at least four more for the season

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Mon Aug 13, 2012 3:02 pm

do you bend/break them?

OFFROAD_SOLUTIONS

Joined: Thu Feb 10, 2011 5:33 pm
Posts: 201
Location: Brissy north side

Posted: Thu Aug 16, 2012 4:59 am

Patrol are 50mm

tuffcoily

Joined: Wed Dec 16, 2009 10:30 pm
Posts: 306
Location: Gold coast

Posted: Thu Aug 16, 2012 8:21 pm

I incased mine with 5mm plate it made them almost indestructible zookimonster has them he will prob sell them now that he has gone 4 link he ran multiple rounds of coopers rally with them. I only sold them to him because I put Jimny ones in they are 100mm longer so had to cut chassis mount and move it fowards but they are easier to get and a bit stronger. I am doing Logan challenge with him this weekend I will ask him how much

Page 1 of 1

[ 9 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum