[jonno_racing]

i need a new set of bushings for my zook, for the rear arms, the chassis end of the arms.. any one know where i can buy these 2 busshings without the rest?? prefer online if i could.

[atari4x4]

the part numbers for genuine rubber ones. Bush where arm attaches to diff is SZ4628281A30 and bush where arm attaches to the chassis is SZ4621365D01

stolen from here.
http://www.outerlimits4x4.com/ftopic191 ... coily+bush

[jonno_racing]

thanks dude, i wonder what suzuki will want for them!!!! i have new polly bushings for the diff, to try and stiffen up my body roll but need new ones for the chassis end 2

[atari4x4]

in that thread he said they were about $50 each!!!

[jonno_racing]

FARK

concidering x4 diff ones were $80 i think i will go for polly

[ZookiMonsta]

Mate, Polly bushes are the last thing you
want in a coily. They stiffen up the rear arms
and allow next to no flex.. being in such a small arm,
it relys on the bush flexing. Less flex in the arm = less
suspension flex. Also they tend to put more stress on the arms
and bolts etc...

Just my 2c.

[jonno_racing]

yeah that i understand.. but to put simply rubber bushings cost to much.. and i am trying to get rid of some of my body roll in the rear...

also u can only buy polly bushings... other than from suzuki

[ZookiMonsta]

Yeah, that's true.
I'm actually after two coily rear arms
with original bushes in them. Instead of buying
new bushes. haha. See how I go.

[jonno_racing]

yeah mine failed transport inspection on the fact my bushings are nackerd...

what coils and shocks do you have in yours.?

[ZookiMonsta]

I'm running standard Jimny coils in the rear,
which is around 40/45mm over standard sierra ones,
umm. Im running Jimny 40mm lifted tough dog shocks
in the rear, flexes like crazy. In the front I have 40mm
lifted iron man coils and struts to suit the lift.
What about yourself?

[jonno_racing]

just the 40mm ebay kit!

how is your body roll?? much diffrence from jimny coils to sierra?

[ZookiMonsta]

oh okay.
Ahh, isn't too bad.
Would be a million times better if the
rear coils weren't worn out. lol. It rolls a far
bit but I havent got the sway bar on and yea the
rear coils are a lil sad.

[Reubs]

atari4x4 wrote:

in that thread he said they were about $50 each!!!

That's not too bad actually. I have paid about that much for poly bushes in the past.

You could try looking for second-hand Jimny arms with ok bushes in them.

Considering the OEM bushes seem to last about 100,000km, it is worth buying them.

[ZookiMonsta]

I went to suzuki their at Springwood looking
for the 4 diff end bushes, and their quoted
me $67.50 per bush.

[Saam]

stiff in rear is good on coilies, flex is gay without balance

[ZOOKCREW]

i went to fulcrum susp. and got the whole rear set fot $125.. Super Pro polyurethane . supercheap actually has em too.

[bigrig91]

too deadly thats pretty cheap. pedders wanted 260 for the front set! hahhaa