[Hotshot993]

Hey I'm looking at getting a Sierra and its soft top. I'm not to sure with how easy it would be to break into, like at the shops and that. just say your opinions about it please.
Thanks Nathan

[rpmwrx]

get a fibreglass hardtop for it... problem solved...

[rpmwrx]

Suzuki Sierra SWB Fibreglass Canopy

http://cgi.ebay.com.au/Suzuki-Sierra-SW ... 3a610aebb5

[tom__]

or a big scary dogg to ride in it with you.

[Hotshot993]

okay sweet, was thinking that. and lol.

[Built4thrashing]

tom__ wrote:

or a big scary dogg to ride in it with you.

or hire shakes and his dress. Enough to scare most away

B4T

[Choppy]

ive had my soft top sierra for ages and never had anything taken out of it, even with the back left up sometimes. i have a little money box in there for my small goodies which is attatched to my seats via wire as my glove box doesnt lock. however im on the sunnycoast and dont park in derellict areas i think you'd be more prone in the city to get stuff taken.

nice hardtop on ebay ... its mine. with all this rain its a great option too

[Hotshot993]

yeah, just lock the glove box. but also just the whole thing being stolen. wouldnt surprise me with some of the young kids now. like im young too, only 17, but these other guys are just little thugs.

[shakes]

Built4thrashing wrote:

tom__ wrote:

or a big scary dogg to ride in it with you.

or hire shakes and his dress. Enough to scare most away

B4T

stop pimping me out... If the missus loses her cut our bub will miss out on going to a private school

[Hotshot993]

bahahaha ^^^^^^^^^ lol.

[dion93]

had my brand new 1 day old tool kit stolen outta the back of mine last night. was out camping at davies creek fnq and someone must have just undid the back clips and taken what they like.

looking at securing it, without converting to a hard canopy. open to all ideas.

[Hotshot993]

yeah see, little fucking pricks aye. i hate people that steal. they are taking fromt he people that worked hard for their stuff. just shows that even if you are good and do good things the bad people will stills tay ahead when they do shit all.

[Hotshot993]

im a bit pissed hearing this, as my dads a cop and hear this stuff all the time. there should be a law that if you see someone stealing your stuff then just pull out your gun and be like what bitch. but to american.

[Bucket]

You just have to realise that security is basically non-existent in a soft top. Yes, there is "scare tactics" and shit to try and prevent it, but at the end of the day it's not hard to unzip a softtop or pull out your trusty old blade and slice your way in.

Simple fact; dont leave anything of value in your softtop fourby

[lump_a_charcoal]

If you leave anything valuable in a Sierra, you deserve what you get.

If you want to keep it, remove it.

[steak_knife]

lump_a_charcoal wrote:

If you leave anything valuable in a Sierra, you deserve what you get.

If you want to keep it, remove it.

So that why so many wives get left in the car at servo's..

[mighty_vites]

just have different colored doors and shit so it looks like a heap of. should give the illusion that its not worth breaking into

[Fatzook]

Fit one of these

[Hotshot993]

that looks sick, is there anything like that but with a glass panel for the back window. a ute conversion like that is sick

[Fatzook]

Hotshot993 wrote:

that looks sick, is there anything like that but with a glass panel for the back window. a ute conversion like that is sick

No. But you could invent it That would be sick bra!!

[Hotshot993]

im not a handy man, i live in subrurbs in brisbane with out a shed or tools, however my friends dad is an engineer with a huge shed and loads of tools, welders etc. but im still shit

[alien]

Fatzook wrote:

Fit one of these

Who made it and how much would it cost to make another one? =)

[Hotshot993]

i know right, looks like it costs a bit

[Fatzook]

alien wrote:

Who made it and how much would it cost to make another one? =)

Me.

And I am thinking of making them as part of the TSOR 2011 line up. Not sure though

[alien]

I'll give you $7.30...

seriously though, it looks great! personally i'd ditch the "roll bar", make the lid on top larger (all the way to the sides as far as possible) and somehow adjust the back so the rear door can still swing open (mines not welded shut lol). perhaps rather than fixing it, the lip over the back could have a 45 angle on it and overhang the rear door slightly to keep it water-tight, but still allow the door to swing past? Last idea would be to lose the checkerplate and use aluminium sheets to keep weight down =)

[alien]

ooo a new pic... yeh i like to be able to put stuff all the way in to the seats (like when i got my new rims, all 4 just fitted layed down in the back jammed against the seats and the rear door jusssst closed)

[Fatzook]

alien wrote:

I'll give you $7.30...

seriously though, it looks great! personally i'd ditch the "roll bar", make the lid on top larger (all the way to the sides as far as possible) and somehow adjust the back so the rear door can still swing open (mines not welded shut lol). perhaps rather than fixing it, the lip over the back could have a 45 angle on it and overhang the rear door slightly to keep it water-tight, but still allow the door to swing past? Last idea would be to lose the checkerplate and use aluminium sheets to keep weight down =)

Yeah I have a sketch here of how I ould do it without the welded tailgate. And the whole assembly weighed like 25 or 30kgs. Tanshi has had it for a few years now.

[alien]

cool... it'd weigh even less if it didnt have the rolly bar bit too =P

where the rear window meets the new tray-top, is there a 90 degree bend there to stop water coming in through the velcro join?

If you're looking at fabricating stuff like this, this stuff would be AWESOME to use for the larger areas: http://www.ayrescom.com/


i had a sample of it once, it was unbelievably strong and weighed the same as an equivalent piece of cardboard!

[Fatzook]

alien wrote:

cool... it'd weigh even less if it didnt have the rolly bar bit too =P

where the rear window meets the new tray-top, is there a 90 degree bend there to stop water coming in through the velcro join?

YEP. It was about 75mm high if I remember correctly

If you're looking at fabricating stuff like this, this stuff would be AWESOME to use for the larger areas: http://www.ayrescom.com/


i had a sample of it once, it was unbelievably strong and weighed the same as an equivalent piece of cardboard!

What is it?

[alien]

awesome.

that sir is a composite panel... its 2 sheets of aluminium with an aluminium honeycomb core... the core (as pictured) is vertical to the outer sheets... you then have the option of a veneer (shown in blue) to give it texture/colour.

So a 6mm thick sheet is made of about a quarter the material but still has the strength of a 5mm or so plate.

a 10mm thick panel weighs only 3.4kg per square meter!