auszookers.com • View topic - Where's this Transfer Case seal go?

Board index » Talking About Stuff » Suzuki Talk

Where's this Transfer Case seal go?

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

Goldy

Joined: Wed Apr 13, 2011 12:12 pm
Posts: 67
Location: Mindarie, Perth

Posted: Wed May 04, 2011 10:50 am

Just want to make sure I put it in the right place before I reassemble it.
I can't seem to find the old 1 to remove and replace it with this 1, obviously looking in the wrong place.
Circled red below, cheers

Taylor74

Joined: Fri Dec 24, 2010 10:26 am
Posts: 198
Location: Perth WA

Posted: Wed May 04, 2011 11:25 am

Speedo drive, some kits come with the seal that go inside the speedo drive assy.

_________________
Suzuki is my way of life.

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Wed May 04, 2011 11:28 am

Isn't the speedo drive seal just an O ring?

I can't pick where that goes. Everything else makes sense though.

Goldy

Joined: Wed Apr 13, 2011 12:12 pm
Posts: 67
Location: Mindarie, Perth

Posted: Wed May 04, 2011 11:34 am

Gwagensteve wrote:

Isn't the speedo drive seal just an O ring?

I can't pick where that goes. Everything else makes sense though.

I thought the same as you...

Are you saying it goes in the end of this Taylor?

Last edited by Goldy on Wed May 04, 2011 11:46 am, edited 1 time in total.

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Wed May 04, 2011 11:35 am

Gwagensteve wrote:

Isn't the speedo drive seal just an O ring?

I can't pick where that goes. Everything else makes sense though.

Thats the outer seal from the drive 'bullet' into the case. This seal looks to be the inner one, drive gear to bullet

Dan

_________________
Lil Foot!
http://tiny.cc/gtsw1

Goldy

Joined: Wed Apr 13, 2011 12:12 pm
Posts: 67
Location: Mindarie, Perth

Posted: Wed May 04, 2011 11:47 am

JrZook wrote:

Gwagensteve wrote:

Isn't the speedo drive seal just an O ring?

I can't pick where that goes. Everything else makes sense though.

Thats the outer seal from the drive 'bullet' into the case. This seal looks to be the inner one, drive gear to bullet

Dan

Guessing that the speedo driver case above is the bullet you mean Dan?

Cheers

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Wed May 04, 2011 11:49 am

Goldy wrote:

JrZook wrote:

Gwagensteve wrote:

Isn't the speedo drive seal just an O ring?

I can't pick where that goes. Everything else makes sense though.

Thats the outer seal from the drive 'bullet' into the case. This seal looks to be the inner one, drive gear to bullet

Dan

Guessing that the speedo driver case above is the bullet you mean Dan?

Cheers

Yep, have a look down inside it. Should see the seal

_________________
Lil Foot!
http://tiny.cc/gtsw1

Goldy

Joined: Wed Apr 13, 2011 12:12 pm
Posts: 67
Location: Mindarie, Perth

Posted: Wed May 04, 2011 12:04 pm

JrZook wrote:

Goldy wrote:

JrZook wrote:

Gwagensteve wrote:

Isn't the speedo drive seal just an O ring?

I can't pick where that goes. Everything else makes sense though.

Thats the outer seal from the drive 'bullet' into the case. This seal looks to be the inner one, drive gear to bullet

Dan

Guessing that the speedo driver case above is the bullet you mean Dan?

Cheers

Yep, have a look down inside it. Should see the seal

Cheers thats it... now to get it out :\

Page 1 of 1

[ 8 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 441 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum