auszookers.com • View topic - Grand Vitara Manual Hubs

Board index » Talking About Stuff » Suzuki Talk

Grand Vitara Manual Hubs

Page 1 of 1

[ 5 posts ]

Print view

Previous topic | Next topic

Author

Message

truongski

az supporter

Joined: Tue Sep 21, 2010 4:59 am
Posts: 164
Location: Brisbane South
Vehicle: SWB Vit & LWB GV

Posted: Tue May 24, 2011 7:56 am

I changed the Auto hubs on the GV over the weekend with coily manual hubs. Nothing too hard. Took off the auto, put on the manual.

Tonight when the missus pulled in the driveway, I checked to see if it was still in the 'FREE' position. Of course it was, but it was very hot. You couldn't keep your hand on the hub assembly for more than a few seconds.

Are they supposed to get hot, have I done something wrong or is there something else wrong?

Thanks :helloo:

_________________
stock as a rock

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Tue May 24, 2011 8:00 am

how much grease did you put in them?

_________________
You're just hating because you don't understand

truongski

az supporter

Joined: Tue Sep 21, 2010 4:59 am
Posts: 164
Location: Brisbane South
Vehicle: SWB Vit & LWB GV

Posted: Tue May 24, 2011 8:07 am

I put some in. Not a lot though. I didn't have the tool to remove the clip, so I didn't pull it apart.

Do you think I should strip it down and put new grease in?

_________________
stock as a rock

Brett

az supporter

Joined: Tue May 27, 2008 11:30 pm
Posts: 1791
Location: Central coast NSW

Posted: Tue May 24, 2011 8:26 am

if your hub is hot my bet is its time to regrease your wheel bearings or you have a brake that is dragging.

they should never get hot to touch even when locked in as they are not moving so dont create heat

truongski

az supporter

Joined: Tue Sep 21, 2010 4:59 am
Posts: 164
Location: Brisbane South
Vehicle: SWB Vit & LWB GV

Posted: Tue May 24, 2011 8:35 am

Brett wrote:

According to the service record, the front brakes were only done about 10k ago. How do you know if your brakes are 'dragging'?

As for the wheel bearings... I have NFI how do check/change it...

I might have to ask Mr Knife for his assistance.... :helloo:

Mr Knife...

_________________
stock as a rock

Page 1 of 1

[ 5 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 425 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum