[suzi-fan-22]

i have a wt and dont know how to brace the t case for when i get some reduction i was thinking a rocktoy ring and one of these:
unbrakeable t case cradle

but there are two types and i dont know which one to get ive got a wt case

or should i get a king kong or make my own?

ps i was thinking of running a g16b in the future.

thanks in advance

[suzi-fan-22]

and also who sells the rocktoy rings?
i couldnt find them on lowrange

[sogone]

http://www.designfab.com.au/

[JD888]

Not sure that you can use the rocktoy ring with that cradle. I have ordered that cradle and you can use either one unless you already have a rear disconnect. I ordered the disconnect one in case I need it for when I get around to building a buggy in the future. BTW, I will have a rocktoy ring for sale when I receive my cradle.

[suzi-fan-22]

Oh ok are you sure, well If you can use it I'll send you a pm but if not I wont grab it off you

[pyrohamish]

does anyone have a dxf for rocktoy ring?

[suzi-fan-22]

Whats a dxf?

[4wheeljive]

I think you should check out oozuks build thread sorry I can't get the link for you I'm on my phone but he used a rocktoy ring and a mighty kong cradle looks greate

[atari4x4]

pyrohamish wrote:

does anyone have a dxf for rocktoy ring?

IMO don't be a tight arse, the dude is trying to make a living & it's not like they're expensive.

suzi-fan-22 wrote:

Whats a dxf?

.dxf is a type of CAD file.

4wheeljive wrote:

I think you should check out oozuks build thread sorry I can't get the link for you I'm on my phone but he used a rocktoy ring and a mighty kong cradle looks greate

rpmwrx did a sweet job of bracing his transfer case. http://auszookers.com/index.php?name=Fo ... c&start=90





FYI there is a search function & it works quite well for common subjects like this.

[suzooky87]

IMO There is nothing wrong with making things yourself. It can be more satisfying sometimes. Just means it will take more time and thinking. Instead of the convenience of just buying something. Although it is good to support a fellow Suzy fan and the suzuki following, afterall if no one buys Suzuki aftermarket products people will stop producing them.

[atari4x4]

suzooky87 wrote:

IMO There is nothing wrong with making things yourself. It can be more satisfying sometimes. Just means it will take more time and thinking. Instead of the convenience of just buying something. Although it is good to support a fellow Suzy fan and the suzuki following, afterall if no one buys Suzuki aftermarket products people will stop producing them.

but directly asking on a forum for the cad working file for a rocktoy ring is a bit of a dog act IMO.

[nato78]

This is how I did mine

http://www.auszookers.com/index.php?nam ... ic&t=21077

[suzi-fan-22]

Quote:

FYI there is a search function & it works quite well for common subjects like this.

I know how to use the searh button I put this tread up looking for comparison advice which I could not from the search button also if I was making a thread to begin with why not answer other people's questions while I'm going? And btw I have seen rpm's and oozook's build threads.
But also thanks for your replys

[suzi-fan-22]

Oh and one important thing I forgot to write is will any of these run with a 2" t case lift?

[suzi-fan-22]

[suzi-fan-22]

i just had a look on low range and they dont sell the orange one any more but does anyone know if the king kong works with a 2'' t case lift?

[tanshi]

you will need to mod the floor to run a 2 " transfer lift i believe

[suzi-fan-22]

yer thats fine