| Author |
Message |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Wed Sep 28, 2011 2:35 am |
|
Hey guys
im looking at getting reduction gears for the zook, though I am unsure as to which ones I should get. I know the general specs of the 4.9:1 and the 6.5:1 and all that.
my zook is on 31x10.5 with stock axels, and I do mostly rock and un-even rut driving so slower is better but the problem is its also my daily driver. so would 6.5:1 be too low for highway speeds? what revs at what speed for example
if you could help out would be appreciated.
cheers scott 
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Wed Sep 28, 2011 2:56 am |
|
I have 6.5's in my coily(3.9) diff ratio's. 100km/h gets me about 3900ish rpm. I think 6.5's are cheaper to purchase also 
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Wed Sep 28, 2011 3:12 am |
|
|
yea there cheaper. i do a bit of travellin up and down from bunno to miriwa (or what eva its spelt)
would that not be to high for to long? how much is the spead dial out?
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Wed Sep 28, 2011 3:27 am |
|
|
speedo is out 10 i think from memory 6.5s are awsome for the rocks will suit you well how ever its not the best on the beach with the 1.3 engine and 31s also its the tyres and diff gears that put the speedo out not the transcase gears
|
|
|
|
 |
Moph

az supporter
Joined: Sat May 19, 2007 11:30 pm Posts: 2535 Location: Perth
Vehicle: 93 Sierra
|
 Posted: Wed Sep 28, 2011 3:31 am |
|
|
From memory I sit at about 4100rpm at 110kph with 6.5's, stock WT diffs and 31" Cooper STTs. I'm really happy with them in mine. Had the Zook up to 125kph in 4th with a trailer on the back (overtaking a road train) so it still has legs in it at speed.
|
|
|
|
 |
vandle
Joined: Sun May 10, 2009 11:30 pm Posts: 50 Location: Brisbane
|
 Posted: Wed Sep 28, 2011 3:31 am |
|
|
I'd recommend 5.14 for 31s especially if its your daily driver.
its low enough for 99% of what you are going to drive.
even though 6.5 are cheaper, you will end up hating them.
they are just too low unless you are going to trailer it everywhere.
Your mates would have finished four wheeling for the day by the time you turn up.
|
|
|
|
 |
Moph

az supporter
Joined: Sat May 19, 2007 11:30 pm Posts: 2535 Location: Perth
Vehicle: 93 Sierra
|
 Posted: Wed Sep 28, 2011 3:32 am |
|
|
^ disagree completely, sorry. I drove 4000+ kays on my Karijini trip in 8 days, with trailer on the back, and not once did I find the gearing to be a problem.
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Wed Sep 28, 2011 4:07 am |
|
|
iv got the 1.6l carbie stock axels, would 4.9:1 put the speedo back to norm. i thought 4000+ would be killing the engine and fuel economy for long trips.
i like the idea of slow 4wd but not reving all the way to perth.
|
|
|
|
 |
vandle
Joined: Sun May 10, 2009 11:30 pm Posts: 50 Location: Brisbane
|
 Posted: Wed Sep 28, 2011 4:22 am |
|
Moph wrote: ^ disagree completely, sorry. I drove 4000+ kays on my Karijini trip in 8 days, with trailer on the back, and not once did I find the gearing to be a problem.
I'm not saying that you can't sit on 110kph with 6.5 gears but I would prefer it at 600rpm lower.
My dad doesn't own a petrol station
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Wed Sep 28, 2011 4:28 am |
|
Moph wrote: ^ disagree completely, sorry. I drove 4000+ kays on my Karijini trip in 8 days, with trailer on the back, and not once did I find the gearing to be a problem. x2 i love my 6.5s i doubt 600 RPM is going to make to much difference to your fuel usage
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Wed Sep 28, 2011 4:29 am |
|
|
Question for you sbbunno Have u drove a zook with 6.5s in it ?
|
|
|
|
 |
sogone

az supporter
Joined: Mon Oct 25, 2010 11:29 am Posts: 2070 Location: Darwin
|
 Posted: Wed Sep 28, 2011 4:29 am |
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Wed Sep 28, 2011 4:30 am |
|
sogone wrote: ^^ Lol. Very Useful input there mate  Maby u might want to add to the convo 
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Wed Sep 28, 2011 4:32 am |
|
no i have not drivin a zook with any gearing, hence the thread 
|
|
|
|
 |
sogone

az supporter
Joined: Mon Oct 25, 2010 11:29 am Posts: 2070 Location: Darwin
|
 Posted: Wed Sep 28, 2011 4:34 am |
|
I run 6.5's. Will be running 6.5's, g16b and 31's for a bit while I sort out my auto conversion. I was running 6.5's with 33 big horns. Seemed well geared. Will let you know how I go in the coming weeks.
TryHard wrote: sogone wrote: ^^ Lol. Very Useful input there mate  Maby u might want to add to the convo 
Happy princess? 
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Wed Sep 28, 2011 4:36 am |
|
Much better 
|
|
|
|
 |
sogone

az supporter
Joined: Mon Oct 25, 2010 11:29 am Posts: 2070 Location: Darwin
|
 Posted: Wed Sep 28, 2011 4:36 am |
|
|
And ps. I was lolling the petrol station comment.
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Wed Sep 28, 2011 4:37 am |
|
sbbunno wrote: no i have not drivin a zook with any gearing, hence the thread  maby someone on the forum could take you for a drive in theres with 6.5 id take you but right now the car has done head gastket and is sitting on blocks ready for total buggy strip down haha
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Wed Sep 28, 2011 4:38 am |
|
sogone wrote: And ps. I was lolling the petrol station comment. haha so was i 
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Wed Sep 28, 2011 4:41 am |
|
sogone wrote: I run 6.5's. Will be running 6.5's, g16b and 31's for a bit while I sort out my auto conversion. I was running 6.5's with 33 big horns. Seemed well geared. Will let you know how I go in the coming weeks. TryHard wrote: sogone wrote: ^^ Lol. Very Useful input there mate  Maby u might want to add to the convo  Happy princess? 
yea let me know.
ill do some reading on some build threads and all that get an idea of what most ppl recon.
the only person i knew owned a petrol staion one the biggest loser and sold it danmit
|
|
|
|
 |
neofitou
Joined: Wed Mar 24, 2010 10:30 pm Posts: 1088 Location: Melbourne
Vehicle: 00 Jimny, 63 Haffy
|
 Posted: Wed Sep 28, 2011 4:42 am |
|
|
I also did the 6.5s with 31"s and 1.3.
It was my DD and I was very happy with it.
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Wed Sep 28, 2011 4:45 am |
|
|
seems like everyones happy with the 6.5:1 and i dun mind them being cheaper lol
|
|
|
|
 |
607CHA

az supporter
Joined: Thu Apr 07, 2011 8:21 pm Posts: 265 Location: Baldhills
Vehicle: 02 jimny
|
 Posted: Wed Sep 28, 2011 5:04 am |
|
|
I was thinking of running 6.5's with 30's and 3.7 diff gears. Would this be close to 31's with 3.9's? And I don't wanna spend the money for 5.14's when atm 6.5's are only $475 on lowrange.
_________________ LIVING LIFE ON THE EDGE, TILL YA ROLL
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Wed Sep 28, 2011 5:14 am |
|
607CHA wrote: I was thinking of running 6.5's with 30's and 3.7 diff gears. Would this be close to 31's with 3.9's? And I don't wanna spend the money for 5.14's when atm 6.5's are only $475 on lowrange.
that ends tomorrow i think, though i thnik i agree.
how would i know what gearing my diffs are
|
|
|
|
 |
Munster
Joined: Sun Jan 04, 2009 10:30 pm Posts: 182 Location: Penrith, NSW
Vehicle: 1993 Sierra 1.6 efi Vit motor,
|
 Posted: Wed Sep 28, 2011 5:14 am |
|
|
I have been running 6.5 with 3.7 diffs and 32" tires for about 2 years now, mainly as a daily driver as well as bush beast. Very happy with them.
_________________ Adventure before Dementia
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Wed Sep 28, 2011 5:17 am |
|
|
what is the stock gearing?
is it 3.9?
|
|
|
|
 |
neofitou
Joined: Wed Mar 24, 2010 10:30 pm Posts: 1088 Location: Melbourne
Vehicle: 00 Jimny, 63 Haffy
|
 Posted: Wed Sep 28, 2011 5:19 am |
|
|
|
 |
sogone

az supporter
Joined: Mon Oct 25, 2010 11:29 am Posts: 2070 Location: Darwin
|
 Posted: Wed Sep 28, 2011 5:22 am |
|
|
In the diff's sbbunno, not in the transfer.
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Wed Sep 28, 2011 5:32 am |
|
sogone wrote: In the diff's sbbunno, not in the transfer.
yea thats what i ment lol
|
|
|
|
 |
rpmwrx

az supporter
Joined: Sat Jul 19, 2008 11:30 pm Posts: 1303 Location: Geelong
Vehicle: JK Jeep, Sierra & Raptor
|
 Posted: Wed Sep 28, 2011 5:35 am |
|
Have a look at the Gear Set Comparison Chart in the below link.
I think it's good to combine diff gears and transfercase reduction gears as it's splits the load between the two instead of having all your gearing in the just the transfercase. This is what i've done and i'm very happy with the results...
http://www.lowrangeoffroad.com/index.ph ... -case.html
|
|
|
|
 |
|