auszookers.com • View topic - Transmission Rebuild

Board index » Talking About Stuff » Suzuki Talk

Transmission Rebuild

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

Dale

Joined: Thu Jun 17, 2010 1:42 am
Posts: 80
Location: Brisbane
Vehicle: Sierra

Posted: Fri Nov 11, 2011 11:55 pm

Hi All,

I'm rebuilding my transmission today and I cant get the case apart? I have tried to use a screwdriver in the slot, however it doesn't come apart. There is loads of silicon holding it together. Any ideas? Thanks Dale

You do not have the required permissions to view the files attached to this post.

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Fri Nov 11, 2011 11:57 pm

Screwdriver in the slot then whack with a hammer. It just needs prying apart, as long as ALL the bolts are out?

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Sat Nov 12, 2011 12:43 am

Have you got the front cover off inside the bellhousing?

You've got a copy of the FSM and are following that right?

_________________
SJ50.4.LYF

Dale

Joined: Thu Jun 17, 2010 1:42 am
Posts: 80
Location: Brisbane
Vehicle: Sierra

Posted: Sat Nov 12, 2011 12:54 am

Yep, missed the two bolts at the top. However I have now damaged the case. Anyone have a 1.3 WT 91 transmission case? In Vic?

Thanks
Dale

Daves4wd

az supporter

Joined: Fri Aug 26, 2011 3:17 pm
Posts: 1286
Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s

Posted: Sat Nov 12, 2011 12:58 am

Use a rubber mellot same impact but softer on the metel

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Sat Nov 12, 2011 12:58 am

How bad? Post some pics, it might be salvageable?

Dale

Joined: Thu Jun 17, 2010 1:42 am
Posts: 80
Location: Brisbane
Vehicle: Sierra

Posted: Sat Nov 12, 2011 1:35 am

A bigger hammer doesn't always pay off

You do not have the required permissions to view the files attached to this post.

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Sat Nov 12, 2011 1:47 am

That's only the bellhousing, I wouldn't stress too much about it.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Sat Nov 12, 2011 5:37 am

Replace it if you can source one otherwise just drill a small hole at the end of the crack and call it good.

also76

Joined: Tue Aug 02, 2011 11:53 am
Posts: 141
Location: Perth

Posted: Sat Nov 12, 2011 7:18 am

yeah its bellhousing man, you'll be sweet, get some devcon to fix it so the crack dont spread..... best shite ever ! a guy i work with mate a keyway for his crank gear out of devcon... drives in on limiter alllll day long and no worries.

ridzilla

az supporter

Joined: Mon Sep 26, 2011 11:27 am
Posts: 306
Location: Western Australia
Vehicle: '91 Sierra, Fluffy Dice.

Posted: Sat Nov 12, 2011 10:39 am

Drill a hole at the end of the crack, then weld it up? Easy done

_________________
If at first you don't succeed, get a bigger hammer

Page 1 of 1

[ 11 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 71 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum