auszookers.com • View topic - I'm a dickhead

Board index » Talking About Stuff » Suzuki Talk

I'm a dickhead - engine question

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

Boneheimer

az supporter

Joined: Wed Sep 15, 2010 7:50 am
Posts: 228
Location: Cairns
Vehicle: 91 Tin Top, 04 Jimny

Posted: Wed Nov 23, 2011 11:42 pm

So I was happy yesterday as I finally got the head on my g16b all torqued down and ready to roll.
This morning I discovered in one of my bags of engine bits that there was two locator pins for the head that I haven't put in....

I should have realised when I was lining all of the bolt holes up :crazy:

So my question today is.... will it adversly affect my engine, and should I take the head off put the pins in - having to buy a new gasket in the process?

Any help would be appreciated, I'll be sulking in the corner... :cry:

DMAC

az supporter

Joined: Thu Jan 29, 2009 10:30 pm
Posts: 1612
Location: North Brisbane

Posted: Wed Nov 23, 2011 11:53 pm

You have answered your own question. You just don't want listen to the answer, which is yes on both counts. :cry:

Yes the dowels need to go in and you will need a new head gasket.

Picked up a head gasket this morning. $19.00

At least the second time round it will be quicker and you will never forget them again. :wink:

_________________
SS

Boneheimer

az supporter

Joined: Wed Sep 15, 2010 7:50 am
Posts: 228
Location: Cairns
Vehicle: 91 Tin Top, 04 Jimny

Posted: Thu Nov 24, 2011 12:07 am

Cheers DMAC, I thought this would be the case... was hoping it wasn't.

Did you happen to pick that gasket up here in Aus, or was it from LROR?

DMAC

az supporter

Joined: Thu Jan 29, 2009 10:30 pm
Posts: 1612
Location: North Brisbane

Posted: Thu Nov 24, 2011 12:14 am

Bought it over the counter this morning.

Bought Inlet and Exhaust manifold gasket, Head gasket $27.00 in total.

Went to Bursons and they couldn't supply all of them and suggested I go to Pro Torque gaskets who supply Bursons. Guess where I'll be going to first next time. (Located Brendale North of Brissie)

I was expecting around $60 - $70 mark.

_________________
SS

ZookFan

Joined: Mon Feb 14, 2011 6:19 am
Posts: 3978
Location: Brisbane,samford,QLD
Vehicle: 92 Sierra Tin Top, 3 X LJ 81's

Posted: Thu Nov 24, 2011 5:06 am

Yeah I have heard of them... they have been there for a while hey :wink:

Boneheimer

az supporter

Joined: Wed Sep 15, 2010 7:50 am
Posts: 228
Location: Cairns
Vehicle: 91 Tin Top, 04 Jimny

Posted: Thu Dec 08, 2011 3:03 am

So my head gasket finally arrived, and I have put two locating dowels in the block, but if memory serves me correctly i'm pretty sure that there was three of them? :roll:

Does anyone know this off the top of their head please, as there appears to be provision for three.

Cheers :wink:

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Thu Dec 08, 2011 5:28 am

2 in my memory bank.....

_________________
I used to be indecisive,
now I'm not so sure.....

MART

Joined: Thu Apr 26, 2007 11:30 pm
Posts: 282
Location: Sydney

Posted: Thu Dec 08, 2011 5:33 am

2 FROM MEMORY

DMAC

az supporter

Joined: Thu Jan 29, 2009 10:30 pm
Posts: 1612
Location: North Brisbane

Posted: Thu Dec 08, 2011 5:50 am

Yep two. One at rear on Passenger side, one at the front on the drivers side.

_________________
SS

Boneheimer

az supporter

Joined: Wed Sep 15, 2010 7:50 am
Posts: 228
Location: Cairns
Vehicle: 91 Tin Top, 04 Jimny

Posted: Thu Dec 08, 2011 7:20 am

You bloody legends, thanks heaps guys!

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 76 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum