[andrewa]

how hard is it to remove & replace carby of 92 1.3 swb sierra
to have it rebuilt.

[Zook_Fan]

Remove and replace is very easy. Take a few pictures of all the wiring and hoses before you pull it off if you are unfamiliar with it but essentially it is the 4 bolts that go through the top into the manifold, the accelerator cable, a couple of hoses and away you go. Are you rebuilding it?

[neofitou]

x2 very easy.
The harder part is the rebuid, taking it to someone is easy, and then attach it to the car and take it to them for a tune up.

[andrewa]

the idea is to rebuild it as it has never been done before to help with better fuel economy.
will have carby acid dipped & thoughly cleaned & rebuilt & tuned just like new. was looking at removing carby
myself to save some money.

[matfan]

acid dipped??

What's wrong with carby cleaner, it made my 20 year old aisin look brand new!!

[JrZook]

matfan wrote:

acid dipped??

What's wrong with carby cleaner, it made my 20 year old aisin look brand new!!

I never knew carby cleaner had etchants to etch off aluminum oxide and and make it shiny new again. What brand?

[matfan]

I can't remember the brand, it was called carburettor & small parts cleaner. Milky white stuff, stings like all hell on bare skin!!