It is currently Wed Aug 05, 2026 5:06 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 5 posts ] 
Author Message

Offline
User avatar

Joined: Sat May 23, 2009 11:30 pm
Posts: 415
Location: Greenbank, QLD
Vehicle: 89'SWBsierra&84'LWBsierra

Post Posted: Thu May 03, 2012 8:31 am 
Reply with quote Top  
hi

i am just starting the LWB build :woohoo: (yes i will start a build thread with pics for this one once i get the internet hooked up at home) so when i got it, the body was/is stuffed so it is going to the dump :( . last night i removed the body from the chassis and have notice it has a fair bit of surface rust on the chassis. i was thinking i could just sand it all back and coat it with some black rust kill paint or something.

what else would you guys think i should do the stop the rust going further eg rust converter, primer then paint? what products would you use?

thanks greg

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Post Posted: Thu May 03, 2012 9:04 am 
Reply with quote Top  
Wire wheel the entire chassis.

Then buy some POR-15 and go for gold. But make sure you do any repairs, mods to the chassis first.

If the rust is bad enough to require the use of rust converter, you may be best looking for a new chassis.

_________________
2013 GV
1998 SV420 ute

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Post Posted: Thu May 03, 2012 9:36 am 
Reply with quote Top  
Por15 is good. Dear, but good. Follow their process.

Spray it with a cheap air gun and compressor. Make sure you clean the gun out after with each use. It dries rubbery gooey an then goes rock hard.

My chassis was rusty but it came up good. My front right body mounts was rusty/pitted from brake fluid and sand..Really need to strip everything back then see how bad things are.

Killrust doesn't do shit.

Mine was in killrust undercoat with rust converted areas it was ok, but the other 3/4 of the chassis, It was still rusting. I had to strip it all again.

_________________
BlueSuzy wrote:
I'm over the G16b's.

 Profile  

Offline
User avatar

Joined: Sat May 23, 2009 11:30 pm
Posts: 415
Location: Greenbank, QLD
Vehicle: 89'SWBsierra&84'LWBsierra

Post Posted: Thu May 03, 2012 10:37 am 
Reply with quote Top  
so where would one look to find some POR - 15? any car paint shop? i am going to keep the LWB for a while so i want to do it right the first time.

thanks Fatzook and bluesuzy

greg

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Post Posted: Thu May 03, 2012 10:44 am 
Reply with quote Top  
PPC import it
http://www.ppcco.com.au/

Locations in Qld
http://www.ppcco.com.au/whereqld.htm

I love how it says on the cans..Partial Ingredients not known
Im surprised this stuff is still allowed in the country. :lol:

Wear gloves for every product. I didnt, My hand peeled. I later worked out it was the Marine clean. MAkes sure you wear a mask if spraying, and make sure it seals good, mine didnt seal around my nose letting air in, i had a black nose, VERY hard to get off. If it dries, Its permanent on you for a few days.

_________________
BlueSuzy wrote:
I'm over the G16b's.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google [Bot] and 947 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours