auszookers.com • View topic - G16b undoing crankshaft gear bolt

Board index » Talking About Stuff » Suzuki Talk

G16b undoing crankshaft gear bolt

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

burls

az supporter

Joined: Sun Mar 07, 2010 10:30 pm
Posts: 989
Location: Ipswich
Vehicle: 95 sj70 and 78 lj81

Posted: Thu Apr 05, 2012 9:37 am

Im having trouble getting the bolt undone. is it left hand or right hand thread?

Llewellyn92

Joined: Tue May 04, 2010 7:28 am
Posts: 263
Location: Moruya NSW

Posted: Thu Apr 05, 2012 11:42 am

regular thread. i used a 3/4in rattle gun to get mine out. Tough bastard, try heating if you can but impact is your best bet

good luck mate.

_________________
tintop, barwork, locked Front , RUF, 4.9's, 31's :

burls

az supporter

Joined: Sun Mar 07, 2010 10:30 pm
Posts: 989
Location: Ipswich
Vehicle: 95 sj70 and 78 lj81

Posted: Thu Apr 05, 2012 12:11 pm

thanks I thought it was. Boy is it tight

tsock0

Joined: Sat Apr 21, 2012 9:12 pm
Posts: 73
Vehicle: 93 vitara estate

Posted: Wed May 02, 2012 6:32 pm

Best way is to get 17 mm socket on a breaker bar and lock it into place and give your key a quick turn, works every time

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Wed May 02, 2012 6:54 pm

tsock0 wrote:

Best way is to get 17 mm socket on a breaker bar and lock it into place and give your key a quick turn, works every time

WITH THE IGNITION LEAD DISCONNECTED!!!!!

_________________
2013 GV
1998 SV420 ute

burls

az supporter

Joined: Sun Mar 07, 2010 10:30 pm
Posts: 989
Location: Ipswich
Vehicle: 95 sj70 and 78 lj81

Posted: Wed May 02, 2012 7:47 pm

Yeah got it. Hardest bit was holding the engine still (wasnt in a car) I used two 4m bars to get it undone. Anyway the block and crank I scored are in good nick

tsock0

Joined: Sat Apr 21, 2012 9:12 pm
Posts: 73
Vehicle: 93 vitara estate

Posted: Thu May 03, 2012 10:49 am

What happens I'd u don't disconnect ignition lead I dont

Jester

Joined: Fri May 08, 2009 11:30 pm
Posts: 726
Location: Adelaide
Vehicle: 1985 Suzuki MightyBoy

Posted: Fri May 04, 2012 9:04 pm

tsock0 wrote:

What happens I'd u don't disconnect ignition lead I dont

engine runs, so you screw everything up

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Fri May 04, 2012 9:08 pm

Jester wrote:

tsock0 wrote:

What happens I'd u don't disconnect ignition lead I dont

engine runs, so you screw everything up

Further to this....

The engine starts, and runs. What happens next can range from nothing at all, to someone or something getting nailed by a rapidly moving breaker bar and 17mm socket.

You don't need ignition, you just need the motor to crank over on the starter a few turns. :wink:

_________________
2013 GV
1998 SV420 ute

tsock0

Joined: Sat Apr 21, 2012 9:12 pm
Posts: 73
Vehicle: 93 vitara estate

Posted: Sat May 05, 2012 10:08 am

thats what i mean u just tick the key so it cracks the bolt pretty simple

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 53 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum