auszookers.com • View topic - Sierra front hub brass bush.

Board index » Talking About Stuff » Suzuki Talk

Sierra front hub brass bush.

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

Deego

Joined: Fri Mar 23, 2012 11:04 am
Posts: 187
Vehicle: Suzuki sierra

Posted: Tue May 15, 2012 4:54 am

Do the sierras have a brash bush that holds the axle centeral

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue May 15, 2012 5:13 am

There is one in the back of the hub spindle. I'm not sure that its purpose is to hold the axle central, but it does remove a little bit of float from the CV.

_________________
2013 GV
1998 SV420 ute

Deego

Joined: Fri Mar 23, 2012 11:04 am
Posts: 187
Vehicle: Suzuki sierra

Posted: Tue May 15, 2012 5:24 am

I'm doing a complete overhaul in the front.just wondering should I replace that to

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue May 15, 2012 5:28 am

Deego wrote:

I'm doing a complete overhaul in the front.just wondering should I replace that to

Nope. They don't wear out. I've never even heard of somone replacing one.

Just do your inner oil seal, Felts, king pins, wheelbearings and dust seal, and re-grease your CV and locking hub assembly, and thats it.

_________________
2013 GV
1998 SV420 ute

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Tue May 15, 2012 9:10 am

It seems the toyota guys change them because the axle seals must be abit shit.

If the axle seal wont seal. This bush can be the problem.

Im yet to change one.

_________________

BlueSuzy wrote:

I'm over the G16b's.

Deego

Joined: Fri Mar 23, 2012 11:04 am
Posts: 187
Vehicle: Suzuki sierra

Posted: Tue May 15, 2012 9:23 am

What is the name of them if I won't to get sone

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Tue May 15, 2012 10:49 am

If you just explain where it is you should be able to order one.

Swivel hub brass bush

_________________

BlueSuzy wrote:

I'm over the G16b's.

303zuke

az supporter

Joined: Wed Aug 19, 2009 11:30 pm
Posts: 2447
Vehicle: LJ50V, SJ70

Posted: Wed May 16, 2012 11:23 am

I don't think they're even available as a separate part, certainly not from Suzuki where it is an integral piece of the spindle. As others have said, I've never heard of anyone having to replace one because they flog out your axle seal.

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Wed May 16, 2012 12:09 pm

Pretty sure you can't replace them. They are part of the spindle, so you would have to buy a new spindle hub.

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Wed May 16, 2012 1:30 pm

The bush is brass/bronze, The knuckle/hub is not.

So.. they are replaceable.

Whether you can buy them or not is a different story.

_________________

BlueSuzy wrote:

I'm over the G16b's.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Wed May 16, 2012 2:05 pm

BlueSuzy wrote:

The bush is brass/bronze, The knuckle/hub is not.

So.. they are replaceable.

Whether you can buy them or not is a different story.

/\ /\ X 2

I've never seen one that wasn't reuseable.

Page 1 of 1

[ 11 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 345 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum