cooperrat wrote:
Power window thing. I have a new master switch on the door side..driver window is up and down ok. Passenger window will go down only. When I put power to the motor wiring direct as in not thro switch. Nothing. Window doesnt go up or down. What am I missing Fuses and thermal thing are all good. Cheers in advance.
First - on the direct wiring thing - recheck your connections - if you can wind the window down using the driver's side switch, the motor is probably good, and applying power directly to the window should also make it go down - there will be two wires to the motor, apply power one way it goes down, the other way it goes up - it's possible to have a defective motor, either worn brushes or a defective commutator/winding so it works intermittently, but that will affect both up & down.
Second - check the passenger side switch - the switches are cross wired to prevent a short circuit when one switch is set up & the other set down - both switches need to work in up/off/down positions for the window to work properly - a defective passenger side switch can cause the driver's side switch not to work, and vice versa.